Enocean rs485
About the Enocean rs485 PCB
Enocean rs485 is an open source PCB design by M-o-a-T, published on GitHub. It is a 2-layer board measuring 28.6 × 62 mm, with 20 components from 12 distinct parts.
Other key parts include the TCM310, MAX14784EASD+T, STH05_3V3 and ESPBEE. By type, the board carries 9 capacitors, 4 ICs, 4 resistors and 2 connectors.
It belongs with the iot & wireless designs in this gallery.
From the project
Schematics and files for MoaT IoT things
This directory contains random schematics etc.
A board to interrupt power and data to a USB device.
Two versions; one has external GPIO inputs, the other contains a hub and a USB-to-GPIO controller.
A simple remote-controlled power switch, with an ESP12 controller and a TCM310 enocean radio. Wired as a simple L-N-L' three-wire terminal.
A simple remote-controlled power switch, with an ESP12 controller. Wired for two L-PE-N screw terminals, one in and one out. Used for heating control, with I²C-connected thermometers.
Main components on the Enocean rs485
Enocean rs485 bill of materials (BOM)
20 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TCM310 | TCM310 | IC1 |
| 1 | MAX14784EASD+T | SO-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | STH05_3V3 | STH05 | U2 |
| 1 | ESPBEE | ESPBEE | U3 |
| 1 | RJ45_SEW | RJ45-NO-SHIELD | J1 |
| 1 | Conn_01x01_Female | Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork | J2 |
| 1 | PogoPad | 2X3_PAD | Prog1 |
| 5 | CP_10µ_16V_0603 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C8, C9 |
| 2 | CP_1µ_100V_0805 | R_0805_2012Metric | C4, C7 |
| 2 | C_10n_0603 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6 |
| 3 | R_10k_0603 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4, R5 |
| 1 | R_180_0603 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
Enocean rs485 design files
The KiCad project lives in the M-o-a-T/moat-hardware repository on GitHub; these links point at the commit this page was built from.
Enocean rs485: common questions
How big is the Enocean rs485 PCB?
The Enocean rs485 measures 28.6 × 62 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Enocean rs485?
20 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Enocean rs485 design files?
From the M-o-a-T/moat-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Enocean rs485 design in my own project?
The repository has no license, so all rights stay with M-o-a-T. Use it as a reference, and ask the author before reusing the design.
More boards in moat-hardware
RP2040/RP2350Base18
140.4 × 84.9 mm162 parts2LNo license0
Raspberry PiPiPower
56 × 65 mm101 parts2LNo license0
RP2040/RP2350Ctrl
67 × 65 mm55 parts2LNo license0
Usb int
46.9 × 17.4 mm41 parts4LNo license0
AVR/ArduinoCell
30 × 53.9 mm36 parts2LNo license0
Base heating
40.7 × 43.4 mm27 parts2LNo license0
Solvis control
54.4 × 45.9 mm22 parts2LNo license0
Base std
25.3 × 30 mm19 parts2LNo license0
ESP8266Enocean switch
43.3 × 67.3 mm18 parts2LNo license0
STM32Proc stm32
28 × 15.5 mm18 parts2LNo license0
Base gira
38 × 53.2 mm18 parts2LNo license0
Similar boards
RPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k
L0 IMU MPU9250
Luos-io
20.3 × 15.2 mm7 parts2LMIT547
L0 USBA
20.3 × 15.3 mm19 parts2LMIT547
L0 Controller motor
20.3 × 15.3 mm11 parts2LMIT547
L0 Dynamixel
20.3 × 15.2 mm15 parts2LMIT547
L0 stepper driver
20.3 × 15.2 mm18 parts2LMIT547