HardLabs

Enocean switch

M-o-a-T·moat-hardware·misc/enocean-switch/enocean-switch.kicad_pcb

Enocean switch PCB layout, top view — open source ESP8266 board by M-o-a-T

About the Enocean switch PCB

Enocean switch is an open source ESP8266 PCB design by M-o-a-T, published on GitHub. It is a 2-layer board measuring 43.3 × 67.3 mm, with 18 components from 13 distinct parts.

Its main chip is the ESP-12S, from the ESP8266 family. Other key parts include the TCM310 and CPC1965G. By type, the board carries 5 capacitors, 4 resistors, 3 ICs, 2 connectors and 2 jumpers.

It belongs with the iot & wireless designs in this gallery.

From the project

Schematics and files for MoaT IoT things

This directory contains random schematics etc.

A board to interrupt power and data to a USB device.

Two versions; one has external GPIO inputs, the other contains a hub and a USB-to-GPIO controller.

A simple remote-controlled power switch, with an ESP12 controller and a TCM310 enocean radio. Wired as a simple L-N-L' three-wire terminal.

A simple remote-controlled power switch, with an ESP12 controller. Wired for two L-PE-N screw terminals, one in and one out. Used for heating control, with I²C-connected thermometers.

Main components on the Enocean switch

TCM310CPC1965GESP-12S

Enocean switch bill of materials (BOM)

18 components, 13 distinct parts.

QtyPartRefs
1
TCM310
IC1
1
CPC1965G
U1
1
ESP-12S
U2
1
Conn_01x03_Female
J1
1
Conn_01x01_Female
J2
2
Jumper_NC
JP1, JP2
1
VTX-214-003-103
PS1
1
PogoPad
Prog1
3
CP_10µ_16V_0603
C1, C2, C3
2
C_10n_0603
C5, C6
2
R_10k_0603
R1, R4
1
R_180_0603
R2
1
R_220_0603
R3

Enocean switch design files

The KiCad project lives in the M-o-a-T/moat-hardware repository on GitHub; these links point at the commit this page was built from.

Enocean switch: common questions

What microcontroller does the Enocean switch use?

The Enocean switch is built around the ESP-12S, from the ESP8266 family.

How big is the Enocean switch PCB?

The Enocean switch measures 43.3 × 67.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Enocean switch?

18 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the Enocean switch design files?

From the M-o-a-T/moat-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Enocean switch design in my own project?

The repository has no license, so all rights stay with M-o-a-T. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Enocean switch without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

More boards in moat-hardware

Similar boards