Base gira
About the Base gira PCB
Base gira is an open source PCB design by M-o-a-T, published on GitHub. It is a 2-layer board measuring 38 × 53.2 mm, with 18 components from 10 distinct parts.
By type, the board carries 4 connectors, 2 jumpers, 2 resistors, 1 transistor and 1 diode.
It belongs with the iot & wireless and power & battery designs in this gallery.
From the project
Schematics and files for MoaT IoT things
This is the collection of files for the physical side of MoaT: Schematics and layouts (kicad), Enclosures (OpenSCAD).
++++++++++++++++ Up-to-date stuff ++++++++++++++++
Controller and module for battery management.
The hardware design supports both active-high (diyBMS) and active-low (MoaT) serial connections.
Random stuff (Enocean adapter, USB intercept, …).
The proc/ directory contains CPU boards, i.e. things that have a bus plug.
Base gira bill of materials (BOM)
18 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2N7002 | SOT-23 | Q1 |
| 1 | Moat_Bus_wire | TE_1775014_socket | J1 |
| 1 | 1wireConn | AVX_9276_3Pin | J2 |
| 1 | I2C | AVX_9276_4Pin | J3 |
| 1 | Conn_01x06 | PinSocket_1x06_P2.54mm_Vertical | J4 |
| 8 | WAGO_243 | Wago_Terminal_243 | 5V1, 12V1, Bus1, Bus2, Bus3, GND1, KNX1, KNX_GND1 |
| 1 | Gira | 2X07 | JP1 |
| 1 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2 |
| 1 | BAT54SW | SOT-323_SC-70 | D1 |
| 2 | 10k | R_0603_1608Metric | R1, R2 |
Base gira design files
The KiCad project lives in the M-o-a-T/moat-hardware repository on GitHub; these links point at the commit this page was built from.
- Layoutbase/gira/base_gira.kicad_pcb
- Schematicbase/gira/base_gira.kicad_sch
Base gira: common questions
How big is the Base gira PCB?
The Base gira measures 38 × 53.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Base gira?
18 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Base gira design files?
From the M-o-a-T/moat-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Base gira design in my own project?
The repository has no license, so all rights stay with M-o-a-T. Use it as a reference, and ask the author before reusing the design.
More boards in moat-hardware
RP2040/RP2350Base18
140.4 × 84.9 mm162 parts2LNo license0
Raspberry PiPiPower
56 × 65 mm101 parts2LNo license0
RP2040/RP2350Ctrl
67 × 65 mm55 parts2LNo license0
Usb int
46.9 × 17.4 mm41 parts4LNo license0
AVR/ArduinoCell
30 × 53.9 mm36 parts2LNo license0
Base heating
40.7 × 43.4 mm27 parts2LNo license0
Solvis control
54.4 × 45.9 mm22 parts2LNo license0
Enocean rs485
28.6 × 62 mm20 parts2LNo license0
Base std
25.3 × 30 mm19 parts2LNo license0
ESP8266Enocean switch
43.3 × 67.3 mm18 parts2LNo license0
STM32Proc stm32
28 × 15.5 mm18 parts2LNo license0
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k