HardLabs

Usb int

M-o-a-T·moat-hardware·misc/usb-int/usb-int.kicad_pcb

Usb int PCB layout, top view — open source board by M-o-a-T

About the Usb int PCB

Usb int is an open source PCB design by M-o-a-T, published on GitHub. It is a 4-layer board measuring 46.9 × 17.4 mm, with 41 components from 21 distinct parts.

Other key parts include the FSUSB42MUX, USB2412-DZK, MCP2221AxSL, AZ1117-3V3 and AP2151W. By type, the board carries 18 capacitors, 12 resistors, 5 ICs, 4 connectors, 1 crystal and 1 diode.

It belongs with the iot & wireless designs in this gallery.

From the project

Schematics and files for MoaT IoT things

This directory contains random schematics etc.

A board to interrupt power and data to a USB device.

Two versions; one has external GPIO inputs, the other contains a hub and a USB-to-GPIO controller.

A simple remote-controlled power switch, with an ESP12 controller and a TCM310 enocean radio. Wired as a simple L-N-L' three-wire terminal.

A simple remote-controlled power switch, with an ESP12 controller. Wired for two L-PE-N screw terminals, one in and one out. Used for heating control, with I²C-connected thermometers.

Main components on the Usb int

FSUSB42MUXUSB2412-DZKMCP2221AxSLAZ1117-3V3AP2151W

Usb int bill of materials (BOM)

41 components, 21 distinct parts.

QtyPartRefs
1
FSUSB42MUX
U1
1
USB2412-DZK
U2
1
MCP2221AxSL
U3
1
AZ1117-3V3
U4
1
AP2151W
U5
1
Crystal_GND24
Y1
1
USB_A_Host
J1
1
USB_A_Device
J2
1
I2C
J3
1
Serial
J4
1
LED
D1
2
18 pF
C1, C2
12
CP_100n_16V_0603
C3, C5, C7, C8, C9, C10, C11, C12 +4
1
C 120µF
C4
3
CP_10µ_16V_0603
C6, C15, C17
1
R_1M_0603
R1
1
12k
R2
5
47k
R3, R4, R6, R11, R12
3
R_100k_0603
R5, R10, R13
1
R_100_0603
R7
Show 1 more
QtyPartRefs
1
R_1k_0603
R9

Usb int design files

The KiCad project lives in the M-o-a-T/moat-hardware repository on GitHub; these links point at the commit this page was built from.

Usb int: common questions

How big is the Usb int PCB?

The Usb int measures 46.9 × 17.4 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Usb int?

41 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the Usb int design files?

From the M-o-a-T/moat-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Usb int design in my own project?

The repository has no license, so all rights stay with M-o-a-T. Use it as a reference, and ask the author before reusing the design.

More boards in moat-hardware

Similar boards