Brewers control panel
machadoleonardo94·Brewers_control_panel·zero-crossing/zero-crossing.kicad_pcb
About the Brewers control panel PCB
Brewers control panel is an open source ESP32 PCB design by machadoleonardo94, published on GitHub. It is a 2-layer board measuring 107 × 62 mm, with 69 components from 42 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the AP2112K-3.3, MOC3021M, PC817 and AMS1117-5.0. By type, the board carries 21 resistors, 11 diodes, 10 capacitors, 6 ICs, 5 transistors and 2 fuses.
Main components on the Brewers control panel
Brewers control panel bill of materials (BOM)
69 components, 42 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32U | U2 |
| 1 | MOC3021M | SMDIP-6_W9.53mm | U3 |
| 1 | PC817 | SMDIP-4_W7.62mm | U4 |
| 1 | AMS1117-5.0 | SOT-223-3_TabPin2 | U5 |
| 1 | ~ 文豪永顺 | HEATSINK-TH_L34.0-W12.0 | U6 |
| 1 | 40N02 | TO-252-2 | Q1 |
| 2 | 2N7002K | SOT-23 | Q2, Q5 |
| 1 | BTA16-600B | TO-220-3_Vertical | Q3 |
| 1 | BC817 | SOT-23 | Q4 |
| 1 | 1WIRE 1Wire | TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal | J1 |
| 2 | CONN_01X02_PIN Conn_01x02_Pin | PhoenixContact_GMSTBA_2,5_2-G-7,62_1x02_P7.62mm_Horizontal | AC1, LOAD1 |
| 2 | 10U 10u | C_0805_2012Metric | CD1, CD3 |
| 2 | 100N 100n | C_0805_2012Metric | CD2, CD4 |
| 1 | C22446878 Polyfuse | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | Fuse | Fuseholder_Clip-5x20mm_Bel_FC-203-22_Lateral_P17.80x5.00mm_D1.17mm_Horizontal | F2 |
| 2 | CONN_01X04_SOCKET Conn_01x04_Socket | Hirose_DF13C_CL535-0404-8-51_1x04-1MP_P1.25mm_Vertical | OLED1, PORT1 |
| 2 | SW_Push | SW_SPST_PTS647_Sx38 | PROG1, RST1 |
| 1 | HLK-5M05 | Converter_ACDC_Hi-Link_HLK-5Mxx | PS1 |
| 1 | CONN_01X03_SOCKET Conn_01x03_Socket | TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal | PWM1 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1N4148W | D_SOD-123 | D1 |
| 1 | SS14 | D_SMA | D2 |
| 1 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D3 |
| 3 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4, D6, D11 |
| 5 | SM4007 | D_MELF | D5, D7, D8, D9, D10 |
| 1 | 22N 22n | L_0805_2012Metric | L1 |
| 1 | 100UF 100uF | C_Elec_6.3x7.7 | C1 |
| 3 | 10U 10u | C_0805_2012Metric | C2, C6, C10 |
| 2 | 100N 100n | C_0805_2012Metric | C3, C4 |
| 1 | C0805C104J5RALTU 1nF | C_0805_2012Metric | C5 |
| 1 | C0805C104J5RALTU 47nF | C_Rect_L11.0mm_W4.3mm_P10.00mm_MKT | C7 |
| 1 | C0805C104J5RALTU 10nF | C_Rect_L7.0mm_W3.5mm_P5.00mm | C8 |
| 1 | 22UF 22uF | CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C9 |
| 4 | 10K 10k | R_0805_2012Metric | R1, R2, R19, R21 |
| 3 | 2K2 2k2 | R_0805_2012Metric | R3, R4, R5 |
| 4 | 1k | R_0805_2012Metric | R6, R7, R9, R15 |
| 2 | 220K 220k | R_0805_2012Metric | R8, R16 |
| 3 | 330 | R_0805_2012Metric | R10, R11, R12 |
| 2 | 360 | R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R13, R14 |
| 1 | 22K 22k | R_0805_2012Metric | R17 |
| 1 | 39 | R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R18 |
| 1 | 470 | R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R20 |
Brewers control panel design files
The KiCad project lives in the machadoleonardo94/Brewers_control_panel repository on GitHub; these links point at the commit this page was built from.
Brewers control panel: common questions
What microcontroller does the Brewers control panel use?
The Brewers control panel is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the Brewers control panel PCB?
The Brewers control panel measures 107 × 62 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Brewers control panel?
69 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Brewers control panel design files?
From the machadoleonardo94/Brewers_control_panel repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Brewers control panel design in my own project?
The repository has no license, so all rights stay with machadoleonardo94. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Brewers control panel without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k