Guitar-Multi-FX-Pedal
MadAvidCoder·Guitar-Multi-FX-Pedal·Hardware/reverb.kicad_sch
About the Guitar-Multi-FX-Pedal PCB
Guitar-Multi-FX-Pedal is an open source PCB design by MadAvidCoder, published on GitHub. It is a board, with 116 components from 26 distinct parts.
Other key parts include the TL074 and PT2399. By type, the board carries 60 resistors, 50 capacitors and 6 ICs.
It belongs with the audio designs in this gallery.
From the project
A digitally controllable, yet fully analog guitar multi-fx pedal.
Main components on the Guitar-Multi-FX-Pedal
Guitar-Multi-FX-Pedal bill of materials (BOM)
116 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TL074 | U7, U12 | |
| 4 | PT2399 | DIP-16_W7.62mm | U8, U9, U10, U11 |
| 21 | 100n | C24, C29, C30, C32, C33, C34, C36, C37 +13 | |
| 11 | 1u | C25, C28, C35, C52, C63, C64, C65, C66 +3 | |
| 5 | 4n7 | C26, C43, C51, C59, C62 | |
| 3 | 1n | C27, C42, C50 | |
| 4 | 47u | C31, C39, C47, C56 | |
| 2 | 1n5 | C60, C61 | |
| 2 | 10n | C68, C71 | |
| 2 | 10u | C69, C72 | |
| 1 | 1M | R45 | |
| 4 | 100k | R46, R47, R90, R103 | |
| 1 | 15K | R48 | |
| 12 | 10k | R49, R51, R52, R53, R60, R65, R75, R76 +4 | |
| 1 | 68K | R50 | |
| 11 | 22k | R54, R55, R63, R67, R68, R74, R78, R85 +3 | |
| 1 | 4k7 | R56 | |
| 3 | 8k2 | R57, R62, R66 | |
| 11 | 12k | R58, R61, R64, R69, R70, R71, R72, R79 +3 | |
| 1 | 3k3 | R59 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1k2 | R73 | |
| 1 | 1k | R89 | |
| 8 | 220k | R91, R92, R93, R95, R98, R99, R100, R101 | |
| 2 | 82k | R94, R102 | |
| 1 | 56k | R96 | |
| 1 | 47k | R97 |
Guitar-Multi-FX-Pedal design files
The KiCad project lives in the MadAvidCoder/Guitar-Multi-FX-Pedal repository on GitHub; these links point at the commit this page was built from.
- SchematicHardware/reverb.kicad_sch
Guitar-Multi-FX-Pedal: common questions
How many components are on the Guitar-Multi-FX-Pedal?
116 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Guitar-Multi-FX-Pedal design files?
From the MadAvidCoder/Guitar-Multi-FX-Pedal repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Guitar-Multi-FX-Pedal design in my own project?
The repository has no license, so all rights stay with MadAvidCoder. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687