Motor feedback
About the Motor feedback PCB
Motor feedback is an open source PCB design by MadsRudolph, published on GitHub. It is a 2-layer board measuring 104 × 104 mm, with 10 components from 8 distinct parts.
Other key parts include the MCP601 and IL300. By type, the board carries 5 resistors, 3 ICs and 2 connectors.
It belongs with the power & battery designs in this gallery.
From the project
Alle 7 system-boards, produktionsfiler til XTool-fiberlaseren og hele genererings-pipelinen. Status og produktionsplan: se ../../PCBRESULTS.md og production/README.md.**
Alle 7 system-boards, produktionsfiler til XTool-fiberlaseren og hele genererings-pipelinen. Status og produktionsplan: se ../../PCBRESULTS.md og production/README.md.**
buck · boost · drivecircuit · feedbackcircuit · rectifier · mppt · currentsense`
Designregler (fiberlaser-guiden): bane 1.0 mm, clearance 0.8 mm — ligger i hvert boards .kicadpro`, så GUI-routing automatisk overholder dem. Komponentnavne er graveret som kobber-tekst på B.Cu.
Main components on the Motor feedback
Motor feedback bill of materials (BOM)
10 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | MCP601 | DIP-8_W7.62mm_LongPads | U9, U11 |
| 1 | IL300 | DIP-8_W7.62mm_LongPads | U10 |
| 2 | Screw_Terminal_01x03 | TerminalBlock_bornier-3_P5.08mm | J1, J3 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R14 |
| 1 | 2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R15 |
| 1 | 33k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R16 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R17 |
| 1 | 66k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R18 |
Motor feedback design files
The KiCad project lives in the MadsRudolph/62768-energy-system repository on GitHub; these links point at the commit this page was built from.
Motor feedback: common questions
How big is the Motor feedback PCB?
The Motor feedback measures 104 × 104 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Motor feedback?
10 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Motor feedback design files?
From the MadsRudolph/62768-energy-system repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Motor feedback design in my own project?
The repository has no license, so all rights stay with MadsRudolph. Use it as a reference, and ask the author before reusing the design.
More boards in 62768-energy-system
AVR/ArduinoSystem.refined
203.1 × 152.4 mm131 parts2LNo license0
AVR/ArduinoSystem
203.1 × 152.4 mm131 parts2LNo license0
AVR/ArduinoNew system
202.2 × 131 mm131 parts2LNo license0
AVR/ArduinoSystem.refined.routed
202.1 × 150 mm131 parts2LNo license0
Motor power
104 × 104 mm58 parts2LNo license0
C2000 feedback
104 × 104 mm45 parts2LNo license0
Buck v2
98.6 × 105.4 mm31 parts2LNo license0
AVR/ArduinoMppt
104 × 104 mm21 parts2LNo license0
AVR/ArduinoMppt buck
104 × 104 mm20 parts2LNo license0
AVR/ArduinoCurrent sense
104 × 104 mm17 parts2LNo license0
Rectifier
104 × 104 mm12 parts2LNo license0
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Module 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k