Motor power
About the Motor power PCB
Motor power is an open source PCB design by MadsRudolph, published on GitHub. It is a 2-layer board measuring 104 × 104 mm, with 58 components from 34 distinct parts.
Other key parts include the MCP601, NE555, ILD74, IR2110 and LM7805. By type, the board carries 13 resistors, 12 diodes, 12 capacitors, 8 ICs, 7 connectors and 2 transistors.
It belongs with the power & battery designs in this gallery.
From the project
Alle 7 system-boards, produktionsfiler til XTool-fiberlaseren og hele genererings-pipelinen. Status og produktionsplan: se ../../PCBRESULTS.md og production/README.md.**
Alle 7 system-boards, produktionsfiler til XTool-fiberlaseren og hele genererings-pipelinen. Status og produktionsplan: se ../../PCBRESULTS.md og production/README.md.**
buck · boost · drivecircuit · feedbackcircuit · rectifier · mppt · currentsense`
Designregler (fiberlaser-guiden): bane 1.0 mm, clearance 0.8 mm — ligger i hvert boards .kicadpro`, så GUI-routing automatisk overholder dem. Komponentnavne er graveret som kobber-tekst på B.Cu.
Main components on the Motor power
Motor power bill of materials (BOM)
58 components, 34 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | MCP601 | DIP-8_W7.62mm_LongPads | U1, U4 |
| 1 | NE555 | DIP-8_W7.62mm_LongPads | U2 |
| 1 | ILD74 | DIP-8_W7.62mm_LongPads | U3 |
| 2 | IR2110 | DIP-14_W7.62mm_LongPads | U5, U8 |
| 1 | LM7805 | TO-220-3_Vertical_LaserPads | U6 |
| 1 | 4N25 | DIP-6_W7.62mm_LongPads | U7 |
| 1 | IRF540N | TO-220-3_Vertical_LaserPads | Q1 |
| 1 | IRF530 | TO-220-3_Vertical_LaserPads_GDS | Q2 |
| 1 | PWM fra MCU | TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | MCP PWM | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | DC Motor | TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | 3-fase ind | TerminalBlock_bornier-3_P5.08mm | J4 |
| 1 | 3-fase ud | TerminalBlock_bornier-3_P5.08mm | J5 |
| 1 | V1 ud til load | TerminalBlock_bornier-2_P5.08mm | J6 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_bornier-3_P5.08mm | J7 |
| 1 | 20k | Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 10k | Potentiometer_Bourns_3296W_Vertical | RV2 |
| 1 | Switch | SW_DIP_SPSTx02_Slide_9.78x7.26mm_W7.62mm_P2.54mm | SW1 |
| 2 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 3 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D3, D4, D7 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 1N4006 | D_DO-41_SOD81_P10.16mm_Horizontal | D5, D6, D8, D9, D10, D11 |
| 1 | 1N5817 | D_DO-41_SOD81_P10.16mm_Horizontal | D12 |
| 1 | Spole terminal | TerminalBlock_bornier-2_P5.08mm | L1 |
| 1 | 8n2 | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1 |
| 5 | 100n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C4, C5, C6, C10 |
| 4 | 22u | CP_Radial_D8.0mm_P3.50mm | C3, C7, C8, C9 |
| 1 | 4700u/50V | CP_Radial_D18.0mm_P7.50mm | C11 |
| 1 | Kondesator terminal | TerminalBlock_bornier-2_P5.08mm | C12 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3 |
| 5 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R6, R10, R11, R13 |
| 1 | 515 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 200 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 2 | 200R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R9 |
| 2 | 10 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8, R12 |
Motor power design files
The KiCad project lives in the MadsRudolph/62768-energy-system repository on GitHub; these links point at the commit this page was built from.
Motor power: common questions
How big is the Motor power PCB?
The Motor power measures 104 × 104 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Motor power?
58 components, from 34 distinct parts. The full bill of materials is listed on this page.
Where can I download the Motor power design files?
From the MadsRudolph/62768-energy-system repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Motor power design in my own project?
The repository has no license, so all rights stay with MadsRudolph. Use it as a reference, and ask the author before reusing the design.
More boards in 62768-energy-system
AVR/ArduinoSystem.refined
203.1 × 152.4 mm131 parts2LNo license0
AVR/ArduinoSystem
203.1 × 152.4 mm131 parts2LNo license0
AVR/ArduinoNew system
202.2 × 131 mm131 parts2LNo license0
AVR/ArduinoSystem.refined.routed
202.1 × 150 mm131 parts2LNo license0
C2000 feedback
104 × 104 mm45 parts2LNo license0
Buck v2
98.6 × 105.4 mm31 parts2LNo license0
AVR/ArduinoMppt
104 × 104 mm21 parts2LNo license0
AVR/ArduinoMppt buck
104 × 104 mm20 parts2LNo license0
AVR/ArduinoCurrent sense
104 × 104 mm17 parts2LNo license0
Rectifier
104 × 104 mm12 parts2LNo license0
Motor feedback
104 × 104 mm10 parts2LNo license0
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Module 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k