Pathfinder-Mark-IV

MagicalPotato715·Pathfinder-Mark-IV·PF MKIV PCB Files/PF Mark IV.kicad_pcb

Pathfinder-Mark-IV PCB layout, top view — open source board by MagicalPotato715

About the Pathfinder-Mark-IV PCB

Pathfinder-Mark-IV is an open source PCB design by MagicalPotato715, published on GitHub. It is a 4-layer board measuring 97 × 95 mm, with 92 components from 20 distinct parts.

Other key parts include the DEV-16771, NRF24L01_Breakout and PCA9548ADB. By type, the board carries 42 resistors, 21 diodes, 7 capacitors, 3 ICs and 1 connector.

It belongs with the power & battery and robotics & motion designs in this gallery.

From the project

Mark IV will be the fourth generation of my hexapod line: Pathfinder (not to be confused with the Hack Club YSWS). Mark IV will feature major consistency improvements to Mark III (mainly just not featuring buck converters).

If you don't believe me, ask @technical_, @NotARoomba, or @Tanook

What: Mark IV will be the fourth generation of my hexapod line: Pathfinder (not to be confused with the Hack Club YSWS). Mark IV will feature major consistency improvements to Mark III (mainly just not featuring buck converters). Additionally, Mark IV has an I2C expander connected to 8 ToF sensors that should allow the finished robot to have some form of autonomous movement.

Pathfinder-Mark-IV, from the project README
From the project README

Main components on the Pathfinder-Mark-IV

Pathfinder-Mark-IV bill of materials (BOM)

92 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
DEV-16771
U1
1
NRF24L01_Breakout
U3
1
PCA9548ADB
U4
1
Conn_01x05_Pin
J3
2
TB005-762-02BE
Batt1, Switch1
1
~
Bno1
1
~
BuckConv1
8
Conn_01x05_Pin
Front_ToF1, Front_ToF2, Leg_ToF1, Leg_ToF2, Leg_ToF3, Leg_ToF4, Leg_ToF5, Leg_ToF6
6
~
Leg_1, Leg_2, Leg_3, Leg_4, Leg_5, Leg_6
1
1N47xxA
D1
20
LED
D2, D3, D4, D5, D6, D7, D8, D9 +12
2
1500uf
C1, C2
2
10uf
C3, C4
3
0.1uf
C5, C6, C7
1
5k
R1
2
4.7k
R2, R6
1
4.7k
R3
1
5k
R4
19
510
R5, R7, R8, R9, R10, R11, R12, R13 +11
18
10k
R27, R28, R29, R30, R31, R32, R33, R34 +10

Pathfinder-Mark-IV design files

The KiCad project lives in the MagicalPotato715/Pathfinder-Mark-IV repository on GitHub; these links point at the commit this page was built from.

Pathfinder-Mark-IV: common questions

How big is the Pathfinder-Mark-IV PCB?

The Pathfinder-Mark-IV measures 97 × 95 mm, has 4 copper layers and is 1.67 mm thick.

How many components are on the Pathfinder-Mark-IV?

92 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pathfinder-Mark-IV design files?

From the MagicalPotato715/Pathfinder-Mark-IV repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Pathfinder-Mark-IV design in my own project?

The repository has no license, so all rights stay with MagicalPotato715. Use it as a reference, and ask the author before reusing the design.

Similar boards