Alarm clock
Magicman5284·alarm-clock
About the Alarm clock PCB
Alarm clock is an open source ESP32 PCB design by Magicman5284, published on GitHub. It is a 2-layer board measuring 93.5 × 61 mm, with 6 components from 6 distinct parts.
Its main chip is the ESP32-DEVKITC-32E, from the ESP32 family. Other key parts include the DFR0299. By type, the board carries 2 ICs, 2 connectors, 1 switch and 1 resistor.
It belongs with the iot & wireless designs in this gallery.
From the project
This project is an alarm clock that runs on an ESP32 and is controlled using an apple shortcut The shortcut can be found here: https://www.icloud.com/shortcuts/9c18b0a72f074b27aea9341c8937683c
This project is an alarm clock that runs on an ESP32 and is controlled using an apple shortcut The shortcut can be found here: https://www.icloud.com/shortcuts/9c18b0a72f074b27aea9341c8937683c
Features: Set alarm Set repeating alarm View alarm list cancel alarm stopwatch timer cancel alarm
About the design: The PCB has a bunch of little bits of text and images over because I decided to customize it This is the third PCB I've made, and it's the first one I went all out on decorating. Look around for some of the easter eggs!
Main components on the Alarm clock
Alarm clock bill of materials (BOM)
6 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-DEVKITC-32E | MODULE_ESP32-DEVKITC-32E | U1 |
| 1 | DFR0299 | MODULE_DFR0299 | U2 |
| 1 | Conn_01x04_Pin | PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x02_Pin | PinSocket_1x02_P2.54mm_Vertical | J2 |
| 1 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1 |
| 1 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
Alarm clock design files
The KiCad project lives in the Magicman5284/alarm-clock repository on GitHub; these links point at the commit this page was built from.
- Layoutalarm clock.kicad_pcb
- Schematicalarm clock.kicad_sch
- BOMBOM.csv
Alarm clock: common questions
What microcontroller does the Alarm clock use?
The Alarm clock is built around the ESP32-DEVKITC-32E, from the ESP32 family.
How big is the Alarm clock PCB?
The Alarm clock measures 93.5 × 61 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Alarm clock?
6 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Alarm clock design files?
From the Magicman5284/alarm-clock repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Alarm clock design in my own project?
The repository has no license, so all rights stay with Magicman5284. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Alarm clock without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k