Devboard-Rp2040-

Magnu-Shaak·Devboard-Rp2040-·PCB/Devboard.kicad_pcb

About the Devboard-Rp2040- PCB

Devboard-Rp2040- is an open source RP2040/RP2350 PCB design by Magnu-Shaak, published on GitHub under the MIT license. It is a 2-layer board measuring 21 × 51 mm, with 35 components from 17 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the NCP1117-3.3_SOT223 and W25Q16JVUXIQ TR. By type, the board carries 17 capacitors, 7 resistors, 6 connectors, 3 ICs, 1 crystal and 1 switch.

It belongs with the dev boards & breakouts designs in this gallery.

Main components on the Devboard-Rp2040-

RP2040 NCP1117-3.3_SOT223 W25Q16JVUXIQ TR

Devboard-Rp2040- bill of materials (BOM)

35 components, 17 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	RP2040	QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm	U1
1	NCP1117-3.3_SOT223	SOT-223-3_TabPin2	U2
1	W25Q16JVUXIQ TR	Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm	U3
1	12 MHz	Crystal_SMD_3225-4Pin_3.2x2.5mm	Y1
1	USB_C_Receptacle_USB2.0_14P	USB_C_Receptacle_HRO_TYPE-C-31-M-12	J1
2	Conn_01x20	PinHeader_1x20_P2.54mm_Vertical	J2, J3
1	Conn_01x03	PinHeader_1x03_P2.54mm_Vertical	J4
2	Conn_01x02	PinHeader_1x02_P2.54mm_Vertical	J5, J6
1	SW_Push	SW_Push_SPST_NO_Alps_SKRK	SW1
2	1uF	C_0402_1005Metric	C1, C10
11	0.1uF	C_0402_1005Metric	C2, C3, C4, C5, C6, C7, C8, C9 +3
2	10uF	C_0603_1608Metric	C13, C14
2	33pF	C_0402_1005Metric	C15, C16
2	5.1K	R_0402_1005Metric	R1, R2
2	27	R_0402_1005Metric	R3, R4
2	1K	R_0402_1005Metric	R5, R6
1	10K	R_0402_1005Metric	R7

Devboard-Rp2040- design files

The KiCad project lives in the Magnu-Shaak/Devboard-Rp2040- repository on GitHub; these links point at the commit this page was built from.

LayoutPCB/Devboard.kicad_pcb
SchematicPCB/Devboard.kicad_sch
BOMProduction/Devboard-BOM(JLC)-JLCPCB Assembly Order.xls

Devboard-Rp2040-: common questions

What microcontroller does the Devboard-Rp2040- use?

The Devboard-Rp2040- is built around the RP2040, from the RP2040/RP2350 family.

How big is the Devboard-Rp2040- PCB?

The Devboard-Rp2040- measures 21 × 51 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Devboard-Rp2040-?

35 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Devboard-Rp2040- design files?

From the Magnu-Shaak/Devboard-Rp2040- repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Devboard-Rp2040- design in my own project?

Yes, under the terms of its MIT license, which Magnu-Shaak chose for the repository.

Can I test firmware for the Devboard-Rp2040- without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.