Groobie
MaheshGit31·groobie
About the Groobie PCB
Groobie is an open source ESP32 PCB design by MaheshGit31, published on GitHub. It is a 2-layer board measuring 105.1 × 89.1 mm, with 7 components from 6 distinct parts.
Its main chip is the XIAO-ESP32-C3, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.
It belongs with the sensors and keyboards designs in this gallery.
From the project
Your desktop pet that loves dancing 😎
A tiny ghost-shaped desk pet on a custom ghost PCB around a Seeed XIAO ESP32-C3, with a 0.96in OLED, an MPU6050 motion sensor, a DHT11 temperature/humidity sensor and two MX-style switches, in a 3D-printed case. He also reminds you to get up and move.
Groobie lives on the OLED. He wanders back and forth along the bottom of the screen and his joy, energy and fullness stats are saved, so he remembers them after power-off.
Main components on the Groobie
Groobie bill of materials (BOM)
7 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DHT11 AliExpress (Simple Robot Store) | Aosong_DHT11_5.5x12.0_P2.54mm | U1 |
| 1 | XIAO-ESP32-C3 XIAO-ESP32-C3-SMD AliExpress (FMchip AE Store) | XIAO-ESP32-C6-DIP | U2 |
| 1 | Conn_01x04_Pin AliExpress (DIY-Victor Store) | Display_128x64_096_I2C | J1 |
| 1 | Conn_01x08_Pin AliExpress (Nextronics Store) | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 2 | SW_Push AliExpress (SZ suhv Store) | SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10K 10k AliExpress (TriArk Electronic Components Store) | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
Groobie design files
The KiCad project lives in the MaheshGit31/groobie repository on GitHub; these links point at the commit this page was built from.
- Layoutgroobie.kicad_pcb
- Schematicgroobie.kicad_sch
- BOMbom.csv
Groobie: common questions
What microcontroller does the Groobie use?
The Groobie is built around the XIAO-ESP32-C3, from the ESP32 family.
How big is the Groobie PCB?
The Groobie measures 105.1 × 89.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Groobie?
7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Groobie design files?
From the MaheshGit31/groobie repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Groobie design in my own project?
The repository has no license, so all rights stay with MaheshGit31. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Groobie without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k