MemoryGame
make717·MemoryGame-PCB·pcb_files/badge.kicad_pcb
About the MemoryGame PCB
MemoryGame is an open source Microchip SAM PCB design by make717, published on GitHub. It is a 2-layer board measuring 53.6 × 53.3 mm, with 24 components from 13 distinct parts.
Its main chip is the ATSAMD21G18A-AUT, from the Microchip SAM family. Other key parts include the MIC5504-3.3YM5, SK9822 and AT25SF041-SSHD-B. By type, the board carries 8 capacitors, 7 ICs, 1 crystal, 1 connector and 1 switch.
It belongs with the wearables designs in this gallery.
From the project
KiCad PCB files for custom Make717 memory game soldering badge
This badge is using the SAMD21G 32-bit microcontroller running CircuitPython. Thank you to Adafruit.
It is also possible to directly program the SAMD21G18A using Serial Wire Debug (SWD). We recommend a J-LINK programmer or similar, connecting to SWDIO1 (data), SWCLK1 (clock), GND1 (ground), and 3V3 (power). You will also need to power the board with 3.3 volts which can be done via the USB connection while programming or the 5V pin near the USB port.
Main components on the MemoryGame
MemoryGame bill of materials (BOM)
24 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATSAMD21G18A-AUT | TQFP-48_7x7mm_P0.5mm | U1 |
| 1 | MIC5504-3.3YM5 | SOT-23-5 | U2 |
| 4 | SK9822 | LED_WS2812_PLCC6_5.0x5.0mm_P1.6mm | U3, U4, U5, U7 |
| 1 | AT25SF041-SSHD-B | SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | Crystal | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 10118193-0001LF | usb | J1 |
| 4 | PTC_pad_badge | PTC_badge | B1, B2, B3, B4 |
| 1 | AAA_holder | aaa_battery_holder | BH1 |
| 1 | PKM13EPYH4000-A0 | PKM13EPYH4002-B0 | SP1 |
| 1 | JS202011SCQN | JS202011SCQN | SW1 |
| 3 | 10u | C_0805_2012Metric | C1, C6, C8 |
| 2 | 15pF | C_0805_2012Metric | C2, C3 |
| 3 | 0.1u | C_0805_2012Metric | C4, C5, C7 |
MemoryGame design files
The KiCad project lives in the make717/MemoryGame-PCB repository on GitHub; these links point at the commit this page was built from.
MemoryGame: common questions
What microcontroller does the MemoryGame use?
The MemoryGame is built around the ATSAMD21G18A-AUT, from the Microchip SAM family.
How big is the MemoryGame PCB?
The MemoryGame measures 53.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MemoryGame?
24 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the MemoryGame design files?
From the make717/MemoryGame-PCB repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the MemoryGame design in my own project?
The repository has no license, so all rights stay with make717. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MemoryGame without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416