7 open source boards using the SK9822

Real designs built with the SK9822, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the SK9822

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SK9822 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 10 µF).
GNDpin 3Connected to: GND 100%
VCCpin 4Connected to: 5V 100%
  • Decoupling capacitor on 60% · 100 nF (2), 10 µF (1)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Control by SSL-A-Team, BE6502 by 89Mods, MemoryGame-PCB by make717 and 2d conduction by VectorSpaceHQ.

The SK9822 in open source designs

The gallery holds 7 open source boards using the SK9822 from 5 GitHub repositories; a typical one measures about 91.4 × 91.4 mm and carries around 133 components.

57% use four copper layers or more, and 57% carry an open source license.

The most starred is Kicker by SSL-A-Team.

Microcontrollers on boards using the SK9822

What boards using the SK9822 are built for

SK9822: common questions

Where can I find a SK9822 reference design?

Each of the 7 boards on this page is a real design using the SK9822. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the SK9822 VCC pin?

The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the SK9822.

Which microcontrollers do boards using the SK9822 use?

Most are built on STM32 (3) and Microchip SAM (2).

How big is a typical board using the SK9822?

The median is 91.4 × 91.4 mm, and 43% are two-layer designs.

What is the most popular open source board using the SK9822?

By GitHub stars, Kicker by SSL-A-Team, with 6 stars.

Can I simulate one of these boards using the SK9822 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part