16 open source boards using the ATSAMD21G18A-AUT

Real designs built with the ATSAMD21G18A-AUT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the ATSAMD21G18A-AUT

Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the ATSAMD21G18A-AUT connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDCORE pin has a capacitor to GND on 13 of 15 designs, most often 1 µF (then 100 nF).
  • The PA28_41 pin is left unconnected on 14 of 15 designs.
  • The VDDANA_6 pin has a decoupling capacitor on 10 of 15 designs, most often 100 nF (then 10 µF).
  • The VDDIO_36 pin has a decoupling capacitor on 10 of 15 designs, most often 100 nF (then 1 µF).
PA00_1pin 1Connected to: Signal 80% · not connected 20%
  • Crystal on 53% · 32.768 kHz (2)
  • Capacitor to GND on 53% · 22 pF (6), 22 µF (1), 15 pF (1)
PA01_2pin 2Connected to: Signal 73% · not connected 27%
  • Crystal on 53% · 32.768 kHz (2)
  • Capacitor to GND on 53% · 22 pF (6), 22 µF (1), 15 pF (1)
PA03_4pin 4Connected to: Signal 67% · not connected 33%
  • Capacitor to GND on 47% · 1 µF (4), 100 nF (3), 4.7 µF (1)
GNDANA_5pin 5Connected to: GND 93%
VDDANA_6pin 6Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 67% · 100 nF (6), 10 µF (3), 1 µF (2)
PA04_9pin 9Connected to: Signal 60% · not connected 40%
  • Series resistor on 33% · 1 kΩ (2), 0 Ω (1), 64.9 kΩ (1)
VDDIO_17pin 17Connected to: 3.3V 100%
  • Decoupling capacitor on 53% · 100 nF (5), 1 µF (2)
GNDpin 18, 35, 42Connected to: GND 93%
PA17_26pin 26Connected to: A connector 27% · not connected 27%
  • Series resistor on 33% · 2.2 kΩ (2), 0 Ω (1), 470 Ω (1)
PA18_27pin 27Connected to: Not connected 60% · a signal 40%
VDDIO_36pin 36Connected to: 3.3V 100%
  • Decoupling capacitor on 67% · 100 nF (5), 1 µF (3), 10 µF (1)
PB22_37pin 37Connected to: Not connected 60% · a signal 40%
PB23_38pin 38Connected to: Not connected 67% · a signal 33%
PA27_39pin 39Connected to: Not connected 80% · a signal 20%
RESET_40pin 40Connected to: A connector 47%
  • Pull-up to 3.3V on 60% · 10 kΩ (5), 1 kΩ (2), 220 Ω (1)
PA28_41pin 41Connected to: Not connected 93%
VDDCOREpin 43Connected to: Signal 80% · VDDCORE 20%
  • Capacitor to GND on 87% · 1 µF (8), 100 nF (1), 10 µF (1)
VDDINpin 44Connected to: 3.3V 100%
  • Decoupling capacitor on 60% · 100 nF (7), 1 µF (3), 10 µF (1)
PB02_47pin 47Connected to: Not connected 73% · a signal 27%
PB03_48pin 48Connected to: Not connected 60% · a signal 40%

26 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Tiny4FSK by New-England-Weather-Balloon-Society, Open source insulin pump by UCBioengineering, Pulse LoRa by risejohan and Node by ParadigmHyperloop.

The ATSAMD21G18A-AUT in open source designs

The gallery holds 16 open source boards using the ATSAMD21G18A-AUT from 15 GitHub repositories; a typical one measures about 57.3 × 52.1 mm and carries around 64 components.

60% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.

The most starred is Tiny4FSK by New-England-Weather-Balloon-Society.

Parts used alongside the ATSAMD21G18A-AUT

Microcontrollers on boards using the ATSAMD21G18A-AUT

ATSAMD21G18A-AUT: common questions

Where can I find a ATSAMD21G18A-AUT reference design?

Each of the 16 boards on this page is a real design using the ATSAMD21G18A-AUT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ATSAMD21G18A-AUT VDDCORE pin connected?

The VDDCORE pin has a capacitor to GND on 13 of 15 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 15 open source designs using the ATSAMD21G18A-AUT.

How is the ATSAMD21G18A-AUT PA28_41 pin connected?

The PA28_41 pin is left unconnected on 14 of 15 designs. Counted from the KiCad layouts of 15 open source designs using the ATSAMD21G18A-AUT.

What decoupling capacitors do designs use on the ATSAMD21G18A-AUT VDDANA_6 pin?

The VDDANA_6 pin has a decoupling capacitor on 10 of 15 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 15 open source designs using the ATSAMD21G18A-AUT.

What parts are used alongside the ATSAMD21G18A-AUT?

The AP2112K-3.3, MCP73831T-2ACI/OT, NCP718 and SPX3819-3.3 appear in the most repositories here.

Which microcontrollers do boards using the ATSAMD21G18A-AUT use?

Most are built on Microchip SAM (16).

How big is a typical board using the ATSAMD21G18A-AUT?

The median is 57.3 × 52.1 mm, and 60% are two-layer designs.

What is the most popular open source board using the ATSAMD21G18A-AUT?

By GitHub stars, Tiny4FSK by New-England-Weather-Balloon-Society, with 96 stars.

Can I simulate one of these boards using the ATSAMD21G18A-AUT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part