Led64-hub75e

makerspacelt·led64-hub75e·project/project.kicad_pcb

Led64-hub75e PCB layout, top view — open source ESP32 board by makerspacelt

About the Led64-hub75e PCB

Led64-hub75e is an open source ESP32 PCB design by makerspacelt, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 100 × 100 mm, with 19 components from 10 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the USBLC6-2SC6. By type, the board carries 6 capacitors, 5 resistors, 2 ICs, 2 connectors, 2 switches and 1 diode.

From the project

Dev NOTE: before commit, run ./kibot.sh to regenerate documentation, bom, gerbers and other assets.

Dev NOTE: before commit, run ./kibot.sh to regenerate documentation, bom, gerbers and other assets.

schematics.pdf pcb.pdf with dimensions * ibom.html

Led64-hub75e, from the project README
From the project README

Main components on the Led64-hub75e

Led64-hub75e bill of materials (BOM)

19 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
USBLC6-2SC6
U1
1
ESP32-S3-WROOM-1
esp32-s3-wroom-1
U2
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J1
1
HUB-75E
J2
2
USR_BTN
SW1, SW2
1
LED
D1
1
3U3
3u3
L1
6
47U
47u
C1, C2, C3, C4, C5, C6
3
4K7
4k7
R1, R2, R3
2
22R
R4, R5

Led64-hub75e design files

The KiCad project lives in the makerspacelt/led64-hub75e repository on GitHub; these links point at the commit this page was built from.

Led64-hub75e: common questions

What microcontroller does the Led64-hub75e use?

The Led64-hub75e is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Led64-hub75e PCB?

The Led64-hub75e measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Led64-hub75e?

19 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Led64-hub75e design files?

From the makerspacelt/led64-hub75e repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Led64-hub75e design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which makerspacelt chose for the repository.

Can I test firmware for the Led64-hub75e without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards