Temp-1w8-pro
makerspacelt·temp-1w8-pro·project/project.kicad_pcb
About the Temp-1w8-pro PCB
Temp-1w8-pro is an open source ESP32 PCB design by makerspacelt, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 40 × 65 mm, with 44 components from 9 distinct parts.
Its main chip is the ESP32-C3-SUPERMINI, from the ESP32 family. By type, the board carries 21 resistors, 11 capacitors, 8 transformers, 2 switches, 1 IC and 1 connector.
It belongs with the iot & wireless and displays & leds designs in this gallery.
From the project
Latest ESPHome .yaml file could be found in a dedicated software repository of this device: https://github.com/makerspacelt/temp-1w8-pro-sw
Latest ESPHome .yaml file could be found in a dedicated software repository of this device: https://github.com/makerspacelt/temp-1w8-pro-sw
8x 1-wire interfaces for DS18b20 using 2.5mm 4p audio jack connectors 2x user programmable buttons (can be used to wake up from deep sleep) 128x64 OLED display Powered via USB-C * Compatibility with esphome and Home Assistant

Main components on the Temp-1w8-pro
Temp-1w8-pro bill of materials (BOM)
44 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-SUPERMINI esp32-c3-supermini | esp32-c3-supermini | U1 |
| 1 | ssd1306 oled | oled_i2c_1.3_128x64_ssd1306 | J1 |
| 2 | USR_BTN | SW_SPST_TL3342 | SW1, SW2 |
| 8 | PJ-242 | PJ-242 | T1, T2, T3, T4, T5, T6, T7, T8 |
| 8 | 100N 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C6, C7, C8, C9 |
| 3 | 10U 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C10, C11 |
| 10 | 330 | R_0805_2012Metric | R1, R3, R5, R7, R9, R11, R13, R15 +2 |
| 10 | 4K7 4k7 | R_0805_2012Metric | R2, R4, R6, R8, R10, R12, R14, R16 +2 |
| 1 | 100 | R_0805_2012Metric | R17 |
Temp-1w8-pro design files
The KiCad project lives in the makerspacelt/temp-1w8-pro repository on GitHub; these links point at the commit this page was built from.
- Layoutproject/project.kicad_pcb
- Schematicproject/project.kicad_sch
- BOMgen/bom.csv
Temp-1w8-pro: common questions
What microcontroller does the Temp-1w8-pro use?
The Temp-1w8-pro is built around the ESP32-C3-SUPERMINI, from the ESP32 family.
How big is the Temp-1w8-pro PCB?
The Temp-1w8-pro measures 40 × 65 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the Temp-1w8-pro?
44 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Temp-1w8-pro design files?
From the makerspacelt/temp-1w8-pro repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Temp-1w8-pro design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which makerspacelt chose for the repository.
Can I test firmware for the Temp-1w8-pro without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k