Oomwoo esp32s3-cm

makerspet·oomwoo-esp32s3-cm·etc/mini-s3-v3.0/mini.kicad_pcb

Oomwoo esp32s3-cm PCB layout, top view — open source ESP32 board by makerspet

About the Oomwoo esp32s3-cm PCB

Oomwoo esp32s3-cm is an open source ESP32 PCB design by makerspet, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 110.2 × 110.5 mm, with 86 components from 31 distinct parts.

Its main chip is the C2913197, from the ESP32 family. Other key parts include the C3007876, C89358, C18208922, C2926986 and C6186. By type, the board carries 33 resistors, 27 capacitors, 9 ICs, 4 connectors, 3 transistors and 3 switches.

It belongs with the iot & wireless designs in this gallery.

From the project

Pi CM4/CM5-compatible Compute Module using ESP32-S3 instead of CPU

Spec TBD; Not decided if we need this or not.

Pi CM4/CM5-compatible Compute Module using ESP32-S3 instead of CPU

Purpose - cost reduced "educational" version of OOMWOO open-source vacuum cleaner robot by replacing Pi CM4/CM5 with ESP32-S3, moving mapping/navigation compute to a separate local PC running ROS2.

Tradeoffs: - this is not a "consumer product" anymore due to the need to set up the additional ROS2 local PC - PC-to-ESP32-S3 Wi-Fi connection can suffer from dead reception zones, busy Wi-Fi - no camera-based obstacle recognition

Main components on the Oomwoo esp32s3-cm

C3007876C2913197C89358C18208922C2926986C6186

Oomwoo esp32s3-cm bill of materials (BOM)

86 components, 31 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
C3007876
BDR6120H
U1, U2
1
C2913197
ESP32-S3-WROOM-1-N4
U3
2
C89358
MT2492
U4, U5
1
C18208922
CH340K_C18208922
U6
2
C2926986
USB-MR-D-015
U7, U9
1
C6186
AMS1117-3.3
U8
1
C15127
AO3401A
Q1
2
C2150
SS8050_C2150
Q2, Q3
1
C7470116
MX250-3.5-02P-B-GY01-CU-A
J2
2
C146013
ZH1.5-6A M
J4, J7
1
C3008549
1.25-4PLTDK
J13
1
C431548
SK12D07VG5
SW1
2
C318884
TS-1187A-B-A-B
SW2, SW3
1
C2286
KT-0603R
LED1
1
C2290
KT-0603W
LED2
3
C191023
1N5819WS
D1, D2, D3
2
C167879
FNR4030S100MT
L1, L2
8
C14663
CC0603KRX7R9BB104
C1, C3, C18, C19, C21, C22, C23, C27
7
C86295
CL10A226MP8NUNE
C2, C4, C7, C9, C13, C24, C25
2
CL10B223KB8NNNC
C5, C6
Show 11 more
QtyPartRefs
2
C45783
CL21A226MAQNNNE
C8, C12
2
C21122
CL10B223KB8NNNC
C10, C11
6
C1594
0603B151K500NT
C14, C15, C16, C17, C26, C37
11
C23193
0603WAF5100T5E
R1, R2, R10, R18, R19, R22, R23, R26 +3
1
C22775
0603WAF1000T5E
R3
13
C25804
0603WAF1002T5E
R4, R5, R7, R8, R9, R11, R12, R20 +5
1
C22967
0603WAF2702T5E
R6
3
C25805
0603WAF1103T5E
R13, R16, R17
1
C328339
AECR0603F15K0K9
R14
1
C23265
0603WAF9102T5E
R15
2
C21189
0603WAF0000T5E
R31, R32

Oomwoo esp32s3-cm design files

The KiCad project lives in the makerspet/oomwoo-esp32s3-cm repository on GitHub; these links point at the commit this page was built from.

Oomwoo esp32s3-cm: common questions

What microcontroller does the Oomwoo esp32s3-cm use?

The Oomwoo esp32s3-cm is built around the C2913197, from the ESP32 family.

How big is the Oomwoo esp32s3-cm PCB?

The Oomwoo esp32s3-cm measures 110.2 × 110.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Oomwoo esp32s3-cm?

86 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Oomwoo esp32s3-cm design files?

From the makerspet/oomwoo-esp32s3-cm repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Oomwoo esp32s3-cm design in my own project?

Yes, under the terms of its Apache-2.0 license, which makerspet chose for the repository.

Can I test firmware for the Oomwoo esp32s3-cm without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards