HardLabs

Smartcube revA CLEAN FLEX

manhoosbilli1·smart-cube-multi-pcb-flex-assembly

Smartcube revA CLEAN FLEX PCB layout, top view — open source board by manhoosbilli1
Simulate this board

About the Smartcube revA CLEAN FLEX PCB

Smartcube revA CLEAN FLEX is an open source PCB design by manhoosbilli1, published on GitHub. It is a 6-layer board measuring 13.1 × 12 mm, with 4 components from 1 distinct parts.

It belongs with the sensors and rf & radio designs in this gallery.

From the project

Smart Cube - multi-PCB flex assembly (PCBA, PCBB, PCBC + FLEX + tabs Y/G/B)

Smart Cube - multi-PCB flex assembly (nRF52832 BLE + BMI270 IMU + multi-input analog mux array)

- Status: In progress - Board size: 74.99 x 21.4 mm - Layers: 6 - Components: 39 - Key ICs: - U1: 2895 - U4: nRF52832-QFxx - U5: BMI270 - U6-U8: 74HC4051LQ/TR

- nRF52832-QFxx (U4) - main MCU; Nordic ARM Cortex-M4F with BLE 5.0 radio - BMI270 (U5) - Bosch 6-axis IMU (accelerometer + gyroscope); detects orientation / gestures on the cube - 74HC4051LQ/TR x3 (U6-U8) - 8-channel analog multiplexers; expand the nRF52's limited ADC channels to read many capacitive / pressure sensors across the cube…

Smartcube revA CLEAN FLEX, from the project README
From the project README

Smartcube revA CLEAN FLEX bill of materials (BOM)

4 components, 1 distinct parts — part numbers from the project's BOM.

QtyPartRefs
4
Conn_01x05_Pin
J8, J9, J10, J11

Smartcube revA CLEAN FLEX design files

The KiCad project lives in the manhoosbilli1/smart-cube-multi-pcb-flex-assembly repository on GitHub; these links point at the commit this page was built from.

Smartcube revA CLEAN FLEX: common questions

How big is the Smartcube revA CLEAN FLEX PCB?

The Smartcube revA CLEAN FLEX measures 13.1 × 12 mm, has 6 copper layers and is 1 mm thick.

How many components are on the Smartcube revA CLEAN FLEX?

4 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Smartcube revA CLEAN FLEX design files?

From the manhoosbilli1/smart-cube-multi-pcb-flex-assembly repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Smartcube revA CLEAN FLEX design in my own project?

The repository has no license, so all rights stay with manhoosbilli1. Use it as a reference, and ask the author before reusing the design.

More boards in smart-cube-multi-pcb-flex-assembly

Similar boards