BobinaTeslaMusical

MarcoBravoG·BobinaTeslaMusical·kicad/pcbtc.kicad_pcb

BobinaTeslaMusical PCB layout, top view — open source STM32 board by MarcoBravoG

About the BobinaTeslaMusical PCB

BobinaTeslaMusical is an open source STM32 PCB design by MarcoBravoG, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 100 × 100 mm, with 96 components from 40 distinct parts.

Its main chip is the STM32F072C8Ux, from the STM32 family. Other key parts include the USBLC6-4SC6, MIC5504-3.3YM5, SFH617A-1, 74LVC3G14 and 74LVC2G86. By type, the board carries 44 capacitors, 26 resistors, 11 ICs, 3 transistors, 3 diodes and 3 inductors.

From the project

For documentation, please see (and like ;) my Hackaday project: https://hackaday.io/project/165112-pcbtc-gan-edition

For documentation, please see (and like ;) my Hackaday project: https://hackaday.io/project/165112-pcbtc-gan-edition

For the mainboard, please use V1.6 to order the pcbs. Select the pcb thickness to be as thin as possible, eg. 1mm. For the current design you also need the bottom pcb coil (https://github.com/lucysrausch/pcbtc/tree/master/hardware/gerbercoil01) and the top pcb coil (https://github.com/lucysrausch/pcbtc/tree/master/hardware/gerbercoil04). For these pcbs, please use 1.6mm thickness or thicker (eg. 2mm).

Main components on the BobinaTeslaMusical

BobinaTeslaMusical bill of materials (BOM)

96 components, 40 distinct parts.

QtyPartRefs
2
USBLC6-4SC6
U1, U11
1
MIC5504-3.3YM5
U2
1
SFH617A-1
U3
1
STM32F072C8Ux
U4
1
74LVC3G14
U5
1
74LVC2G86
U6
1
MIC4416
U7
1
Si8540
U8
2
74LVC1G11
U9, U10
2
LMG5200
Q2, Q4
1
IPD50R380CE
Q3
1
USB_C_Receptacle_USB2.0
J1
1
XT60
J4
1
Setup
SW1
1
WE 750032052
T1
1
FAULT
FAULT1
1
PWR
PWR1
3
SS310
D10, D11, D13
3
CBW201209U600T
L1, L2, L3
11
10u
C1, C16, C21, C22, C24, C25, C28, C33 +3
Show 20 more
QtyPartRefs
12
100n
C2, C3, C4, C5, C6, C7, C8, C9 +4
5
10u
C10, C14, C32, C43, C44
4
1n
C12, C23, C30, C35
1
470u
C15
3
47nF
C17, C18, C19
1
3n3
C20
3
220u
C27, C29, C31
2
100n
C34, C41
2
470pF
C39, C42
2
5k1
R1, R2
4
120
R3, R5, R10, R15
5
1k
R4, R6, R8, R13, R14
4
5k1
R7, R22, R23, R25
1
470k
R9
4
2k
R11, R12, R16, R26
1
10
R17
2
33
R18, R19
1
10m
R20
1
47k
R21
1
100k
R24

BobinaTeslaMusical design files

The KiCad project lives in the MarcoBravoG/BobinaTeslaMusical repository on GitHub; these links point at the commit this page was built from.

BobinaTeslaMusical: common questions

What microcontroller does the BobinaTeslaMusical use?

The BobinaTeslaMusical is built around the STM32F072C8Ux, from the STM32 family.

How big is the BobinaTeslaMusical PCB?

The BobinaTeslaMusical measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the BobinaTeslaMusical?

96 components, from 40 distinct parts. The full bill of materials is listed on this page.

Where can I download the BobinaTeslaMusical design files?

From the MarcoBravoG/BobinaTeslaMusical repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the BobinaTeslaMusical design in my own project?

Yes, under the terms of its GPL-3.0 license, which MarcoBravoG chose for the repository.

Can I test firmware for the BobinaTeslaMusical without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards