7 open source boards using the 74LVC3G14
Real designs built with the 74LVC3G14, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Pcbtc
lucysrausch
100 × 100 mm96 parts2LNo license223Prototype1
nmikstas
111.8 × 80.8 mm164 parts4LNo license20STM32
BetsyBoardBig
engstad
48 × 48 mm70 parts4LNo license1STM32
BobinaTeslaMusical
MarcoBravoG
100 × 100 mm96 parts2LGPL-3.00RC2014 BACKPLANE WITH 16550 UART
dennisperry
127 × 153 mm47 parts2LNo license0ESP32
Led button
GeniePod
90 × 90 mm116 parts2LCERN-OHL-S-2.02STM32
BetsyBoard
engstad
20.3 × 43.2 mm42 parts4LNo license1
How designs wire the 74LVC3G14
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74LVC3G14 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF.
- Pin 1 has a resistor to GND on 2 of 5 designs, most often 1 kΩ.
- Pin 3 has a resistor to GND on 2 of 5 designs, most often 1 kΩ.
- Pin 3 has a capacitor to GND on 2 of 5 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: 74LVC1G11 40% |
|
| Pin 3 | Connected to: 74LVC1G11 40%, a connector 40% |
|
| GNDpin 4 | Connected to: GND 83% · not connected 17% | — |
| VCCpin 8 | Connected to: VCC 100% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pcbtc by lucysrausch, Prototype1 by nmikstas, Led button by GeniePod and BetsyBoard by engstad.
The 74LVC3G14 in open source designs
The gallery holds 7 open source boards using the 74LVC3G14 from 6 GitHub repositories; a typical one measures about 100 × 90 mm and carries around 96 components.
57% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is Pcbtc by lucysrausch.
Parts used alongside the 74LVC3G14
74LVC3G14: common questions
Where can I find a 74LVC3G14 reference design?
Each of the 7 boards on this page is a real design using the 74LVC3G14. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LVC3G14 VCC pin?
The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the 74LVC3G14.
What resistor goes on the 74LVC3G14 pin 1?
Pin 1 has a resistor to GND on 2 of 5 designs, most often 1 kΩ. Counted from the KiCad layouts of 6 open source designs using the 74LVC3G14.
What resistor goes on the 74LVC3G14 pin 3?
Pin 3 has a resistor to GND on 2 of 5 designs, most often 1 kΩ. Counted from the KiCad layouts of 6 open source designs using the 74LVC3G14.
What parts are used alongside the 74LVC3G14?
The 74LVC1G11, 74LVC2G86, MIC4416, MIC5504-3.3YM5 and SFH617A-1 appear in the most repositories here.
Which microcontrollers do boards using the 74LVC3G14 use?
Most are built on STM32 (4) and ESP32 (1).
How big is a typical board using the 74LVC3G14?
The median is 100 × 90 mm, and 57% are two-layer designs.
What is the most popular open source board using the 74LVC3G14?
By GitHub stars, Pcbtc by lucysrausch, with 223 stars.
Can I simulate one of these boards using the 74LVC3G14 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.