23 open source boards using the 74LVC1G11

Real designs built with the 74LVC1G11, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

23 boardsClear filters|Most starred

How designs wire the 74LVC1G11

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the 74LVC1G11 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 8 of 10 designs, most often 100 nF (then 10 µF).
  • Pin 1 has a resistor to GND on 5 of 10 designs, most often 1 kΩ (then 10 kΩ).
Pin 1Connected to: 74LVC1G11 20%, SFH617A-1 20%, a connector 20%
  • Resistor to GND on 50% · 1 kΩ (2), 10 kΩ (2), 100 kΩ (1)
GNDpin 2Connected to: GND 90%
Pin 4Connected to: The microcontroller 30%, 74LVC3G14 20%
  • Resistor to GND on 30% · 1 kΩ (4), 100 kΩ (1)
VCCpin 5Connected to: VCC 80% · a signal 20%
  • Decoupling capacitor on 80% · 100 nF (9), 10 µF (1), 10 nF (1)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pcbtc by lucysrausch, Hotswap ble by ebastler, Cft ctl by alexiosc and Pockey by Hob-dev.

The 74LVC1G11 in open source designs

The gallery holds 23 open source boards using the 74LVC1G11 from 12 GitHub repositories; a typical one measures about 120 × 100 mm and carries around 195 components.

68% use four copper layers or more, and 22% carry an open source license.

The most starred is Pcbtc by lucysrausch.

Microcontrollers on boards using the 74LVC1G11

74LVC1G11: common questions

Where can I find a 74LVC1G11 reference design?

Each of the 23 boards on this page is a real design using the 74LVC1G11. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74LVC1G11 VCC pin?

The VCC pin has a decoupling capacitor on 8 of 10 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 10 open source designs using the 74LVC1G11.

What resistor goes on the 74LVC1G11 pin 1?

Pin 1 has a resistor to GND on 5 of 10 designs, most often 1 kΩ (then 10 kΩ). Counted from the KiCad layouts of 10 open source designs using the 74LVC1G11.

What parts are used alongside the 74LVC1G11?

The 74LVC1G00, 74LVC1G74, 74LVC2G86, 74LVC3G14 and AP2112K-3.3 appear in the most repositories here.

Which microcontrollers do boards using the 74LVC1G11 use?

Most are built on RISC-V (10), STM32 (3), Nordic nRF (2) and AVR/Arduino (1).

How big is a typical board using the 74LVC1G11?

The median is 120 × 100 mm, and 32% are two-layer designs.

What is the most popular open source board using the 74LVC1G11?

By GitHub stars, Pcbtc by lucysrausch, with 223 stars.

Can I simulate one of these boards using the 74LVC1G11 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part