CNC-BOT ESP32 - copia
MariaSanchezPortillo·CNC-2025-2·Esquema y PCB/CNC-BOT ESP32/CNC-BOT ESP32 - copia.kicad_pcb
About the CNC-BOT ESP32 - copia PCB
CNC-BOT ESP32 - copia is an open source ESP32 PCB design by MariaSanchezPortillo, published on GitHub. It is a 2-layer board measuring 89.5 × 55.5 mm, with 17 components from 6 distinct parts.
Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. By type, the board carries 7 connectors, 3 diodes, 3 capacitors, 3 resistors and 1 IC.
It belongs with the robotics & motion and iot & wireless designs in this gallery.
From the project
Este proyecto desarrolla una CNC casera, económica y educativa, basada en la estructura del proyecto Piccolo, pero utilizando un ESP32 y servomotores SG-5010 para lograr un sistema compacto, preciso y fácil de replicar.
Este proyecto desarrolla una CNC casera, económica y educativa, basada en la estructura del proyecto Piccolo, pero utilizando un ESP32 y servomotores SG-5010 para lograr un sistema compacto, preciso y fácil de replicar.
La CNC opera mediante un ESP32 que controla tres servomotores, permitiendo ejecutar trazados y movimientos básicos en un pequeño plano cartesiano. Su diseño está pensado para estudiantes que desean aprender conceptos de CNC sin requerir máquinas costosas.
Main components on the CNC-BOT ESP32 - copia
CNC-BOT ESP32 - copia bill of materials (BOM)
17 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-DEVKIT-V1 | MODULE_ESP32_DEVKIT_V1 | U1 |
| 1 | Barrel_Jack_Switch | BarrelJack_Horizontal | J2 |
| 6 | Screw_Terminal_01x03 | PinHeader_1x03_P2.54mm_Vertical | J5, J6, J7, J8, J9, J10 |
| 3 | LED+ | LED_D3.0mm_Horizontal_O6.35mm_Z10.0mm | D1, D2, D3 |
| 3 | C_Polarized_US | CP_Radial_D10.0mm_P5.00mm | C1, C2, C3 |
| 3 | R_US | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
CNC-BOT ESP32 - copia design files
The KiCad project lives in the MariaSanchezPortillo/CNC-2025-2 repository on GitHub; these links point at the commit this page was built from.
CNC-BOT ESP32 - copia: common questions
What microcontroller does the CNC-BOT ESP32 - copia use?
The CNC-BOT ESP32 - copia is built around the ESP32-DEVKIT-V1, from the ESP32 family.
How big is the CNC-BOT ESP32 - copia PCB?
The CNC-BOT ESP32 - copia measures 89.5 × 55.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CNC-BOT ESP32 - copia?
17 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the CNC-BOT ESP32 - copia design files?
From the MariaSanchezPortillo/CNC-2025-2 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the CNC-BOT ESP32 - copia design in my own project?
The repository has no license, so all rights stay with MariaSanchezPortillo. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the CNC-BOT ESP32 - copia without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in CNC-2025-2
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k