CNC-BOT ESP32 - reducida

MariaSanchezPortillo·CNC-2025-2·Esquema y PCB/CNC-BOT ESP32/CNC-BOT ESP32 - reducida.kicad_pcb

CNC-BOT ESP32 - reducida PCB layout, top view — open source ESP32 board by MariaSanchezPortillo

About the CNC-BOT ESP32 - reducida PCB

CNC-BOT ESP32 - reducida is an open source ESP32 PCB design by MariaSanchezPortillo, published on GitHub. It is a 2-layer board measuring 89.5 × 55.5 mm, with 17 components from 6 distinct parts.

Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. By type, the board carries 7 connectors, 3 diodes, 3 capacitors, 3 resistors and 1 IC.

It belongs with the robotics & motion and iot & wireless designs in this gallery.

From the project

Este proyecto desarrolla una CNC casera, económica y educativa, basada en la estructura del proyecto Piccolo, pero utilizando un ESP32 y servomotores SG-5010 para lograr un sistema compacto, preciso y fácil de replicar.

Este proyecto desarrolla una CNC casera, económica y educativa, basada en la estructura del proyecto Piccolo, pero utilizando un ESP32 y servomotores SG-5010 para lograr un sistema compacto, preciso y fácil de replicar.

La CNC opera mediante un ESP32 que controla tres servomotores, permitiendo ejecutar trazados y movimientos básicos en un pequeño plano cartesiano. Su diseño está pensado para estudiantes que desean aprender conceptos de CNC sin requerir máquinas costosas.

Main components on the CNC-BOT ESP32 - reducida

CNC-BOT ESP32 - reducida bill of materials (BOM)

17 components, 6 distinct parts.

QtyPartRefs
1
ESP32-DEVKIT-V1
U1
1
Barrel_Jack_Switch
J2
6
Screw_Terminal_01x03
J5, J6, J7, J8, J9, J10
3
LED+
D1, D2, D3
3
C_Polarized_US
C1, C2, C3
3
R_US
R1, R2, R3

CNC-BOT ESP32 - reducida design files

The KiCad project lives in the MariaSanchezPortillo/CNC-2025-2 repository on GitHub; these links point at the commit this page was built from.

CNC-BOT ESP32 - reducida: common questions

What microcontroller does the CNC-BOT ESP32 - reducida use?

The CNC-BOT ESP32 - reducida is built around the ESP32-DEVKIT-V1, from the ESP32 family.

How big is the CNC-BOT ESP32 - reducida PCB?

The CNC-BOT ESP32 - reducida measures 89.5 × 55.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CNC-BOT ESP32 - reducida?

17 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the CNC-BOT ESP32 - reducida design files?

From the MariaSanchezPortillo/CNC-2025-2 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the CNC-BOT ESP32 - reducida design in my own project?

The repository has no license, so all rights stay with MariaSanchezPortillo. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the CNC-BOT ESP32 - reducida without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in CNC-2025-2

Similar boards