ESP32-Just1MoreMiniBrd

mariosgit·ESP32-Just1MoreMiniBrd·PCB-KiCad/ESP32j1mmb/ESP32j1mmb.kicad_pcb

ESP32-Just1MoreMiniBrd PCB layout, top view — open source ESP32 board by mariosgit

About the ESP32-Just1MoreMiniBrd PCB

ESP32-Just1MoreMiniBrd is an open source ESP32 PCB design by mariosgit, published on GitHub under the MIT license. It is a 2-layer board measuring 34 × 45.5 mm, with 11 components from 9 distinct parts.

Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the AP1117-33. By type, the board carries 3 connectors, 3 resistors, 2 ICs, 2 capacitors and 1 diode.

It belongs with the iot & wireless designs in this gallery.

From the project

ESP32 mini board

For use with one of these PRC Uart adapters...

Gerber files do not show (all?) the footprint labels on silkscreen ?

Plug the FTDI thing in the 6 right pins on the FTDI header. Also make a connection from RTS on the FTDI adapter to the remaining left pin of the FTDI header. You can also connect 5V from the FTDI board to the Vin pin. Put the voltage select jumper on the FTDI board to 3.3V.

ESP32-Just1MoreMiniBrd, from the project README
From the project README

Main components on the ESP32-Just1MoreMiniBrd

ESP32-Just1MoreMiniBrd bill of materials (BOM)

11 components, 9 distinct parts.

QtyPartRefs
1
ESP32-WROOM-32
U1
1
AP1117-33
U2
1
GND - FTDI
J1
2
Left
J2, J3
1
LED
D1
1
10u
C1
1
100n
C2
2
10k
R1, R2
1
220
R3

ESP32-Just1MoreMiniBrd design files

The KiCad project lives in the mariosgit/ESP32-Just1MoreMiniBrd repository on GitHub; these links point at the commit this page was built from.

ESP32-Just1MoreMiniBrd: common questions

What microcontroller does the ESP32-Just1MoreMiniBrd use?

The ESP32-Just1MoreMiniBrd is built around the ESP32-WROOM-32, from the ESP32 family.

How big is the ESP32-Just1MoreMiniBrd PCB?

The ESP32-Just1MoreMiniBrd measures 34 × 45.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP32-Just1MoreMiniBrd?

11 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the ESP32-Just1MoreMiniBrd design files?

From the mariosgit/ESP32-Just1MoreMiniBrd repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ESP32-Just1MoreMiniBrd design in my own project?

Yes, under the terms of its MIT license, which mariosgit chose for the repository.

Can I test firmware for the ESP32-Just1MoreMiniBrd without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards