HardLabs

Kicad riscv workshop

MarkoMuc·kicad-riscv-workshop·00-template/FRI-ESP32.kicad_pcb

Kicad riscv workshop PCB layout, top view — open source ESP32 board by MarkoMuc

About the Kicad riscv workshop PCB

Kicad riscv workshop is an open source ESP32 PCB design by MarkoMuc, published on GitHub. It is a 4-layer board measuring 34.9 × 48.5 mm, with 27 components from 14 distinct parts.

Its main chip is the ESP32-C3-MINI-1-N4, from the ESP32 family. Other key parts include the USBLC6-2SC6 and C22466451. By type, the board carries 10 resistors, 7 capacitors, 3 ICs, 3 diodes and 1 connector.

From the project

- Uradni repozitorij: https://github.com/bulicp/FRI-ESP32-PCB-workshop/tree/main

- Uradni repozitorij: https://github.com/bulicp/FRI-ESP32-PCB-workshop/tree/main

- Postavimo shemo. Kjer grupiramo komponente glede na funkcionalnost. - Preko USB + USB C konektor zelimo da napajamo vse komponente na sistemi (procesor, ledice, itd.)

Izhodisce je 00-template iz git repozitorija delavnice: - .PCB: printed circuit board. - .SCH: schemas. Dve shemi: power and digital + schema, ki ju zdruzi.

Main components on the Kicad riscv workshop

USBLC6-2SC6C22466451ESP32-C3-MINI-1-N4

Kicad riscv workshop bill of materials (BOM)

27 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
USBLC6-2SC6
U1
1
C22466451
XC6220B331MR
U2
1
ESP32-C3-MINI-1-N4
ESP32-C3-MINI-1
U3
1
GT-USB-7010ASV
USB_C_Receptacle_USB2.0_16P
J1
3
B3U-1000P
SW_Push
BOOT1, RESET2, USERBUTTON1
1
PESD5V0S1UL
D1
1
C2297
LED YELLOW
D2
1
C2297
LED GREEN
D3
2
10UF
10uF
C1, C4
1
4.7UF
4.7uF
C2
4
100NF
100nF
C3, C5, C6, C7
2
5.1K
R1, R2
6
10K
R3, R6, R7, R8, R9, R10
2
330
R4, R5

Kicad riscv workshop design files

The KiCad project lives in the MarkoMuc/kicad-riscv-workshop repository on GitHub; these links point at the commit this page was built from.

Kicad riscv workshop: common questions

What microcontroller does the Kicad riscv workshop use?

The Kicad riscv workshop is built around the ESP32-C3-MINI-1-N4, from the ESP32 family.

How big is the Kicad riscv workshop PCB?

The Kicad riscv workshop measures 34.9 × 48.5 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Kicad riscv workshop?

27 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Kicad riscv workshop design files?

From the MarkoMuc/kicad-riscv-workshop repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Kicad riscv workshop design in my own project?

The repository has no license, so all rights stay with MarkoMuc. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Kicad riscv workshop without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards