HardLabs

AWS GATEWAY

marydovika·AWS·KiCAD FILES__PCB__Printed/AWS GATEWAY/AWS GATEWAY.kicad_pcb

AWS GATEWAY PCB layout, top view — open source ESP32 board by marydovika
Simulate this board

About the AWS GATEWAY PCB

AWS GATEWAY is an open source ESP32 PCB design by marydovika, published on GitHub. It is a 2-layer board measuring 140 × 90 mm, with 31 components from 11 distinct parts.

Its main chip is the ESP32-DEVKITC-32U, from the ESP32 family. By type, the board carries 19 connectors, 6 resistors and 4 ICs.

From the project

AWS Project Gen4

//////////////////////////////////////////////////////////////////////////////////////////////////

Automatic Weather Stations (AWS) play a critical role in environmental monitoring, yet their deployment in remote and energy-constrained locations remains limited by rigid and monolithic power architectures. Conventional systems are often designed for single energy sources, leading to inefficiencies, frequent power interruptions, high maintenance costs, and poor adaptability to dynamic environmental conditions. This research proposes the development of a modular and adaptive power electronics…

Main components on the AWS GATEWAY

ESP32-DEVKITC-32U

AWS GATEWAY bill of materials (BOM)

31 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-DEVKITC-32U
U1
1
~
U4
1
~
U5
1
~
U6
8
Screw_Terminal_01x02
J35, J36, J37, J38, J39, J42, J48, J49
2
Screw_Terminal_01x04
J40, J41
4
Screw_Terminal_01x03
J43, J44, J45, J46
5
Screw_Terminal_01x02
J56, J57, J58, J59, J66
1
~
GSM1
1
~
SD1
6
R
R6, R7, R10, R11, R12, R15

AWS GATEWAY design files

The KiCad project lives in the marydovika/AWS repository on GitHub; these links point at the commit this page was built from.

AWS GATEWAY: common questions

What microcontroller does the AWS GATEWAY use?

The AWS GATEWAY is built around the ESP32-DEVKITC-32U, from the ESP32 family.

How big is the AWS GATEWAY PCB?

The AWS GATEWAY measures 140 × 90 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the AWS GATEWAY?

31 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the AWS GATEWAY design files?

From the marydovika/AWS repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the AWS GATEWAY design in my own project?

The repository has no license, so all rights stay with marydovika. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the AWS GATEWAY without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in AWS

Similar boards