9 open source boards using the ESP32-DEVKITC-32U
Real designs built with the ESP32-DEVKITC-32U, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Gate controller
weswitt
108 × 83 mm33 parts2LNo license4ESP32
MiAM PAMI V3 Stepper
14chanwa
62 × 95 mm33 parts2LNo license0ESP32
Pipernigrum iot
naufalyafisusanto
140.3 × 84.9 mm28 parts2LNo license0ESP32
Bridge
nichtrami
131.8 × 51.8 mm14 parts2LApache-2.00ESP32
Bluetooth jammer experimento
Romemu1810-tech
76 × 61.5 mm8 parts2LNo license0ESP32
AWS GATEWAY
marydovika
140 × 90 mm31 parts2LNo license0ESP32
MiAM PAMI 2024 DC
14chanwa
69.8 × 96.8 mm31 parts2LNo license0ESP32
MiAM PAMI V2 StepperMainBoard
14chanwa
64 × 95 mm28 parts2LNo license0ESP32
MiAM PAMI V3 DC
14chanwa
62 × 95 mm26 parts2LNo license0
How designs wire the ESP32-DEVKITC-32U
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ESP32-DEVKITC-32U connects to, and the resistors, capacitors and other passives placed on it.
- The EN pin is left unconnected on 6 of 6 designs.
- The SD2 pin is left unconnected on 6 of 6 designs.
- The SD3 pin is left unconnected on 6 of 6 designs.
- The CMD pin is left unconnected on 6 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| ENpin 2 | Connected to: Not connected 100% | — |
| SENSOR_VPpin 3 | Connected to: Not connected 83% · a signal 17% | — |
| SENSOR_VNpin 4 | Connected to: Not connected 83% · a signal 17% | — |
| IO34pin 5 | Connected to: Not connected 67% · a signal 33% | — |
| IO35pin 6 | Connected to: Not connected 67% · a signal 33% | — |
| IO25pin 9 | Connected to: A connector 50% · not connected 17% |
|
| IO26pin 10 | Connected to: A connector 50% · not connected 17% |
|
| IO27pin 11 | Connected to: A connector 33% · not connected 17% |
|
| GND1pin 14 | Connected to: GND 83% · not connected 17% | — |
| SD2pin 16 | Connected to: Not connected 100% | — |
| SD3pin 17 | Connected to: Not connected 100% | — |
| CMDpin 18 | Connected to: Not connected 100% | — |
| EXT_5Vpin 19 | Connected to: 5V 67% · not connected 33% | — |
| CLKpin 20 | Connected to: Not connected 100% | — |
| SD0pin 21 | Connected to: Not connected 100% | — |
| SD1pin 22 | Connected to: Not connected 100% | — |
| IO2pin 24 | Connected to: Not connected 67% · a signal 33% | — |
| IO0pin 25 | Connected to: Not connected 83% · a signal 17% | — |
| GND2pin 32 | Connected to: GND 83% · not connected 17% | — |
| IO21pin 33 | Connected to: A connector 33%, another IC 33% · not connected 33% |
|
| RXD0pin 34 | Connected to: Not connected 100% | — |
| TXD0pin 35 | Connected to: Not connected 83% · a signal 17% | — |
| IO22pin 36 | Connected to: A connector 33%, another IC 33% · not connected 33% |
|
| GND3pin 38 | Connected to: GND 83% · not connected 17% | — |
14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Gate controller by weswitt, MiAM PAMI 2024 DC by 14chanwa, AWS GATEWAY by marydovika and Pipernigrum iot by naufalyafisusanto.
The ESP32-DEVKITC-32U in open source designs
The gallery holds 9 open source boards using the ESP32-DEVKITC-32U from 6 GitHub repositories; a typical one measures about 76 × 90 mm and carries around 28 components.
100% are two-layer designs, the rest use four layers or more, and 11% carry an open source license.
The most starred is Gate controller by weswitt.
Microcontrollers on boards using the ESP32-DEVKITC-32U
What boards using the ESP32-DEVKITC-32U are built for
ESP32-DEVKITC-32U: common questions
Where can I find a ESP32-DEVKITC-32U reference design?
Each of the 9 boards on this page is a real design using the ESP32-DEVKITC-32U. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32-DEVKITC-32U EN pin connected?
The EN pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the ESP32-DEVKITC-32U.
How is the ESP32-DEVKITC-32U SD2 pin connected?
The SD2 pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the ESP32-DEVKITC-32U.
How is the ESP32-DEVKITC-32U SD3 pin connected?
The SD3 pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the ESP32-DEVKITC-32U.
Which microcontrollers do boards using the ESP32-DEVKITC-32U use?
Most are built on ESP32 (9).
How big is a typical board using the ESP32-DEVKITC-32U?
The median is 76 × 90 mm, and 100% are two-layer designs.
What is the most popular open source board using the ESP32-DEVKITC-32U?
By GitHub stars, Gate controller by weswitt, with 4 stars.
Can I simulate one of these boards using the ESP32-DEVKITC-32U before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.