AWS PROJECT

marydovika·AWS·KiCAD FILES__PCBA/AWS PROJECT.kicad_pcb

AWS PROJECT PCB layout, top view — open source ESP32 board by marydovika
Simulate this board

About the AWS PROJECT PCB

AWS PROJECT is an open source ESP32 PCB design by marydovika, published on GitHub. It is a 2-layer board measuring 206.3 × 91.3 mm, with 207 components from 87 distinct parts.

Its main chip is the ESP32-WROOM-32E__4MB_HIGH_TEMP_, from the ESP32 family. Other key parts include the AMS1117-3.3, TXB0108RGYR, SIM7000E, DS3231MZ_TRL and Ai-Thinker RA-08H. By type, the board carries 76 resistors, 68 capacitors, 19 diodes, 16 ICs, 8 jumpers and 7 transistors.

It belongs with the power & battery designs in this gallery.

From the project

AWS Project Gen4

//////////////////////////////////////////////////////////////////////////////////////////////////

Automatic Weather Stations (AWS) play a critical role in environmental monitoring, yet their deployment in remote and energy-constrained locations remains limited by rigid and monolithic power architectures. Conventional systems are often designed for single energy sources, leading to inefficiencies, frequent power interruptions, high maintenance costs, and poor adaptability to dynamic environmental conditions. This research proposes the development of a modular and adaptive power electronics…

Main components on the AWS PROJECT

AWS PROJECT bill of materials (BOM)

207 components, 87 distinct parts — part numbers from the project's BOM.

QtyPartRefs
5
AMS1117-3.3
U1, U2, U10, U12, U17
1
TXB0108RGYR
U3
1
ESP32-WROOM-32E__4MB_HIGH_TEMP_
U4
1
SIM7000E
U5
1
DS3231MZ_TRL
U8
1
Ai-Thinker RA-08H
U9
1
ST3485EBDR
U11
1
FT232RL-REEL
U13
1
BQ24650RVAR
U14
1
TPS2121RUXR
U15
1
AP64501SP-13
U16
1
STM32F401CCU6
U18
3
MMBT3904
Q1, Q2, Q3
2
2N7002
Changjiang Electronics Tech (CJ)
Q4, Q7
2
NMOS
Q5, Q6
1
C3E-25.000-12-3030-X-R
Y1
1
104224-0820
J7
1
503398-1892
J16
1
TYPE-C-31-M-12
J24
1
BHX1-1225-PC
BT1
Show 67 more
QtyPartRefs
2
U.FL-R-SMT(10)
GSM1, GSM2
7
Jumper_2_Small_Open
JP9, JP10, JP11, JP12, JP13, JP18, JP21
1
Jumper_2_Small_Open
JP19
2
SW_SPST
SW1, SW2
1
100k
TH1
4
PESDHC3D3V3U
hongjiacheng
D3, D4, D7, D22
9
NET_LED
D5, D8, D9, D11, D13, D14, D17, D18 +1
1
ESDA6V1W5
D6
4
1N5819WS
D20, D21, D24, D25
1
B540C-13-F
D23
1
FerriteBead_Small
FB1
1
6.1uH
L1
1
SRN6045TA-3R3Y
L2
6
10uF
C1, C3, C30, C35, C61, C62
17
0.1uF
C2, C4, C6, C11, C12, C13, C15, C18 +9
4
Cm
C5, C10, C21, C22
9
1uF
C7, C8, C9, C16, C29, C31, C36, C63 +1
1
22uF
C14
1
100uF
C17
3
10uF
C25, C47, C48
3
4.7uF
C32, C68, C71
2
2.2uF
C37, C49
2
22pF
C38, C54
1
0.01uF
C39
4
1uF
C40, C41, C43, C53
2
0.1uF
C42, C50
1
10uF
C44
1
100nF
C45
1
10nF
C46
1
OPEN
C52
1
2.7nF
C55
3
22uF
C56, C59, C60
1
10uF
C57
1
33pF
C58
1
10nF
C66
2
22pF
C72, C73
2
0R
R1, R24
15
4.7k
R2, R3, R5, R6, R7, R8, R13, R14 +7
17
10k
R4, R10, R11, R12, R30, R34, R37, R54 +9
7
1k
R9, R15, R16, R23, R29, R31, R35
2
20K
R36, R70
1
120
R39
2
5.1k
R40, R41
2
270R
R42, R43
2
3.9
R44, R45
2
23.7k
R46, R48
2
5k
R47, R49
1
499K
R50
1
36K
R51
1
25k
R52
1
51.1K
R53
1
5.23k
R56
1
7.5k
R57
1
10
R58
1
100
R59
1
2.2
R60
1
10
R61
3
5K1
R62, R63, R65
1
4.22M
R64
1
154k
R66
1
887k
R67
1
162k
R68
1
13k
R72
1
1.5K
R74
1
2k
R76
1
1.2K
R78
1
330
R81

AWS PROJECT design files

The KiCad project lives in the marydovika/AWS repository on GitHub; these links point at the commit this page was built from.

AWS PROJECT: common questions

What microcontroller does the AWS PROJECT use?

The AWS PROJECT is built around the ESP32-WROOM-32E__4MB_HIGH_TEMP_, from the ESP32 family.

How big is the AWS PROJECT PCB?

The AWS PROJECT measures 206.3 × 91.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the AWS PROJECT?

207 components, from 87 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the AWS PROJECT design files?

From the marydovika/AWS repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the AWS PROJECT design in my own project?

The repository has no license, so all rights stay with marydovika. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the AWS PROJECT without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in AWS

Similar boards