Airmote

Mateix10·Airmote·PCB/Kicad/Airemote.kicad_pcb

Airmote PCB layout, top view — open source ESP32 board by Mateix10

About the Airmote PCB

Airmote is an open source ESP32 PCB design by Mateix10, published on GitHub. It is a 2-layer board measuring 31 × 58 mm, with 12 components from 7 distinct parts.

Its main chip is the XIAO-ESP32-C6-SMD, from the ESP32 family. Other key parts include the BME280. By type, the board carries 5 resistors, 4 diodes, 2 ICs and 1 transistor.

It belongs with the iot & wireless and sensors designs in this gallery.

From the project

A ESP32-based home assistant IR remote

Control any IR device and monitor room temperature, pressure and humidity with Home Assistant.

I always wanted to add my older devices that aren't compatible with Home Assistant to my automations. I want to turn my old stereo on when I start playing music, without having to reach for the half-broken remote.

The schematic and PCB are pretty simple, just connecting the LEDs to a 2n2222 transistor and accompanying resistors for protection.

Airmote, from the project README
From the project README

Main components on the Airmote

Airmote bill of materials (BOM)

12 components, 7 distinct parts.

QtyPartRefs
1
XIAO-ESP32-C6-SMD
U1
1
BME280
U2
1
PN2222A
Q1
3
LED
D1, D2, D3
1
LED
D4
1
220R
R1
4
47R
R2, R3, R4, R5

Airmote design files

The KiCad project lives in the Mateix10/Airmote repository on GitHub; these links point at the commit this page was built from.

Airmote: common questions

What microcontroller does the Airmote use?

The Airmote is built around the XIAO-ESP32-C6-SMD, from the ESP32 family.

How big is the Airmote PCB?

The Airmote measures 31 × 58 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Airmote?

12 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Airmote design files?

From the Mateix10/Airmote repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Airmote design in my own project?

The repository has no license, so all rights stay with Mateix10. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Airmote without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards