HardLabs

Gpu dvi card

matgla·mspc·gpu_dvi_card/gpu_dvi_card.kicad_pcb

Gpu dvi card PCB layout, top view — open source RP2040/RP2350 board by matgla

About the Gpu dvi card PCB

Gpu dvi card is an open source RP2040/RP2350 PCB design by matgla, published on GitHub under the MIT license. It is a 4-layer board measuring 24 × 50 mm, with 55 components from 23 distinct parts.

Its main chip is the RP2350_60QFN, from the RP2040/RP2350 family. Other key parts include the W25Q32JVSS and AP2112K-3.3. By type, the board carries 20 resistors, 19 capacitors, 5 connectors, 4 ICs, 4 transistors and 2 inductors.

It belongs with the usb & debug tools designs in this gallery.

From the project

Repository for MSPC hardware design

Hardware for MSPC: a small modular computer built from a mainboard and extension cards that plug into the MSPC bus. The mainboard runs yasos.

Every board is a KiCad project with its fabrication outputs next to it in outputs/.

- The projects are in KiCad 8 format. Newer KiCad versions upgrade them on the first save, and the result no longer opens in KiCad 8. Do such an upgrade as its own commit, with no design changes, so later diffs stay readable. - Schematic PDFs (outputs/schematic.pdf) are tracked, so the schematics can be read without KiCad. Gerbers and drill files are not: plot them…

Main components on the Gpu dvi card

W25Q32JVSSRP2350_60QFNAP2112K-3.3

Gpu dvi card bill of materials (BOM)

55 components, 23 distinct parts.

QtyPartRefs
2
W25Q32JVSS
U1, U4
1
RP2350_60QFN
U2
1
AP2112K-3.3
U3
4
BS170F
Q1, Q2, Q3, Q4
1
ECS-120-8-36-CGN-TR
Y1
1
Conn_01x03_Pin
J1
1
NOT_HDMI_A
J2
1
Conn_02x10_Odd_Even
J3
1
Conn_01x03_Male
J4
1
Conn_01x02_Pin
J5
1
FerriteBead
FB1
1
3.3u
L1
11
100n
C1, C3, C5, C9, C10, C12, C13, C14 +3
4
4.7u
C2, C4, C6, C7
2
14p
C8, C11
2
1u
C19, C20
6
10k
R1, R2, R3, R4, R28, R32
2
0
R5, R6
8
270
R7, R8, R9, R10, R11, R12, R13, R14
1
0R
R15
Show 3 more
QtyPartRefs
1
< 10k
R29
1
33
R30
1
1k
R31

Gpu dvi card design files

The KiCad project lives in the matgla/mspc repository on GitHub; these links point at the commit this page was built from.

Gpu dvi card: common questions

What microcontroller does the Gpu dvi card use?

The Gpu dvi card is built around the RP2350_60QFN, from the RP2040/RP2350 family.

How big is the Gpu dvi card PCB?

The Gpu dvi card measures 24 × 50 mm, has 4 copper layers and is 1.0192 mm thick.

How many components are on the Gpu dvi card?

55 components, from 23 distinct parts. The full bill of materials is listed on this page.

Where can I download the Gpu dvi card design files?

From the matgla/mspc repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Gpu dvi card design in my own project?

Yes, under the terms of its MIT license, which matgla chose for the repository.

Can I test firmware for the Gpu dvi card without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in mspc

Similar boards