Glove
matthewlai·GloveElectronics
About the Glove PCB
Glove is an open source ESP32 PCB design by matthewlai, published on GitHub under the Apache-2.0 license. It is a 4-layer board measuring 46 × 29.5 mm, with 62 components from 29 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the XC6220B331MR, PCA9546APW,118, DRV2605YZFR and TP4054. By type, the board carries 22 capacitors, 20 resistors, 8 ICs, 4 connectors, 4 diodes and 2 switches.
Main components on the Glove
Glove bill of materials (BOM)
62 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U1 |
| 1 | XC6220B331MR | SOT-23-5 | U2 |
| 1 | PCA9546APW,118 | SOP-16_L5.0-W4.4-P0.65-LS6.4-BL | U3 |
| 4 | DRV2605YZFR | DSBGA-9_L1.5-W1.5-R3-C3-P0.50-BL | U5, U6, U7, U9 |
| 1 | TP4054 | SOT-23-5 | U8 |
| 1 | DNP | VLP2 | M1 |
| 1 | 2N7002 | SOT-323_SC-70 | Q1 |
| 1 | USB_C_Receptacle_USB2.0_14P | USB-C_SMD-TYPE-C-31-M-12 | J1 |
| 1 | Conn_01x08 | PinHeader_2x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x02_Socket | CONN-SMD_B2B-PH-SM4-TB-LF-SN | J3 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | SW_SPDT | SW-TH_SK12D07VG3 | SW2 |
| 1 | TS-1187A-B-A-B | SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | SW3 |
| 1 | W | LED_0603_1608Metric | D1 |
| 1 | R | LED_0603_1608Metric | D2 |
| 1 | G | LED_0603_1608Metric | D3 |
| 1 | YELLOW | LED_0805_2012Metric | D6 |
| 8 | 1uF | C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C10, C11 |
| 4 | 10u | C_0603_1608Metric | C7, C8, C9, C12 |
| 7 | 47u | C_1206_3216Metric | C13, C14, C17, C18, C19, C20, C21 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 100n | C_0402_1005Metric | C15, C22 |
| 1 | 22u | C_0603_1608Metric | C16 |
| 2 | 5.1k | R_0402_1005Metric | R1, R2 |
| 10 | 2.2k | R_0402_1005Metric | R3, R5, R6, R8, R9, R10, R11, R12 +2 |
| 1 | 3.3k | R_0402_1005Metric | R4 |
| 3 | 10k | R_0402_1005Metric | R7, R23, R24 |
| 2 | 100 | R_0402_1005Metric | R13, R16 |
| 1 | 680 | R_0402_1005Metric | R17 |
| 1 | 1R | R_0402_1005Metric | R18 |
Glove design files
The KiCad project lives in the matthewlai/GloveElectronics repository on GitHub; these links point at the commit this page was built from.
- LayoutGlove.kicad_pcb
- SchematicGlove.kicad_sch
Glove: common questions
What microcontroller does the Glove use?
The Glove is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the Glove PCB?
The Glove measures 46 × 29.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Glove?
62 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the Glove design files?
From the matthewlai/GloveElectronics repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Glove design in my own project?
Yes, under the terms of its Apache-2.0 license, which matthewlai chose for the repository.
Can I test firmware for the Glove without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in GloveElectronics
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k