Pomodoro V7
MaxLell·Pomodoro_Clock·Hardware/PCBA/Pomodoro_V7/Pomodoro_V7.kicad_pcb
About the Pomodoro V7 PCB
Pomodoro V7 is an open source ESP32 PCB design by MaxLell, published on GitHub under the MIT license. It is a 4-layer board measuring 75.1 × 75.1 mm, with 88 components from 17 distinct parts.
Its main chip is the ESP32-S2-MINI-2-N4, from the ESP32 family. Other key parts include the LIS2HH12, USBLC6-2SC6 and AP2112K-3.3TRG1. By type, the board carries 60 diodes, 11 resistors, 9 capacitors, 4 ICs and 4 connectors.
From the project
So this is basically what this device (will) is about. It will sit on my desk and ping me, when I need to take a break, and not only ping me, but rather shine a bright light at me, so that I actually get my lazy a** up and move around for a couple of minutes - day in day out. You
So this is basically what this device (will) is about. It will sit on my desk and ping me, when I need to take a break, and not only ping me, but rather shine a bright light at me, so that I actually get my lazy a** up and move around for a couple of minutes - day in day out. You might say: Well you can also set a timer on your smartphone and go from there, to which I reply: Yeah you can, but if you want to do that day-in, day-out, you need a lot of will power and the most perfect habits the world has ever witnessed in man-kind. I am not such a person.
Main components on the Pomodoro V7
Pomodoro V7 bill of materials (BOM)
88 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S2-MINI-2-N4 | ESP32-S2-MINI-1 | IC1 |
| 1 | LIS2HH12 | Kionix_LGA-12_2x2mm_P0.5mm_LayoutBorder2x4y | U1 |
| 1 | USBLC6-2SC6 | SOT95P280X145-6N | U2 |
| 1 | AP2112K-3.3TRG1 AP2112K-3.3 | SOT-23-5 | U3 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Horizontal | J10 |
| 1 | USB4120-03-C USB4120-03-C_REVA | GCT_USB4120-03-C_REVA | J11 |
| 2 | Conn_01x01_Pin | PinHeader_1x01_P2.54mm_Vertical | J14, J15 |
| 60 | WS2812B-2020 | LED_WS2812B-2020_PLCC4_2.0x2.0mm | D1, D2, D3, D4, D5, D6, D7, D8 +52 |
| 3 | 1U/16V+/X5R 1u/16V+/X5R | C_0805_2012Metric | C1, C8, C9 |
| 2 | 10U/16V+/X5R 10u/16V+/X5R | C_0805_2012Metric | C2, C3 |
| 1 | 100N/16V+/X5R 100n/16V+/X5R | C_0805_2012Metric | C4 |
| 1 | 0805B105K250DC 1u/16V+/X5R | C_0805_2012Metric | C5 |
| 2 | CC0805KRX7R9BB104 100n/16V+/X5R | C_0805_2012Metric | C6, C7 |
| 1 | CR0805-FX-5101ELF 10k(1%) | R_0805_2012Metric | R1 |
| 8 | CR0805-FX-5101ELF 5k1(1%) | R_0805_2012Metric | R2, R3, R4, R5, R7, R8, R9, R10 |
| 1 | PTV09A-4025F-B103 10k 1/20W | Pot | R6 |
| 1 | RC0805FR-07100RL 100R(1%) | R_0805_2012Metric | R11 |
Pomodoro V7 design files
The KiCad project lives in the MaxLell/Pomodoro_Clock repository on GitHub; these links point at the commit this page was built from.
Pomodoro V7: common questions
What microcontroller does the Pomodoro V7 use?
The Pomodoro V7 is built around the ESP32-S2-MINI-2-N4, from the ESP32 family.
How big is the Pomodoro V7 PCB?
The Pomodoro V7 measures 75.1 × 75.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Pomodoro V7?
88 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pomodoro V7 design files?
From the MaxLell/Pomodoro_Clock repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pomodoro V7 design in my own project?
Yes, under the terms of its MIT license, which MaxLell chose for the repository.
Can I test firmware for the Pomodoro V7 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Earlier revisions in the repo: Pomodoro_V1
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k