8 open source boards using the LIS2HH12
Real designs built with the LIS2HH12, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Zynq
juliancoy
120 × 60 mm295 partsMIT75ESP32
Neosword
wrickert
217.1 × 77.1 mm70 parts2LNo license8ESP32
Hw amp
intentfulmotion
61 × 36 mm47 parts2LCERN-OHL-S-2.06STM32
Kicad rfm95-breakout board
Bamelink
69.2 × 67 mm60 parts2LNo license1ESP32
Haptic-Glove
ZharbolatDinmukhamed
62 × 46.9 mm108 parts4LNo license0ESP32
Pomodoro V7
MaxLell
75.1 × 75.1 mm88 parts4LMIT0STM32
UsbMeter
TheBadZhang
17.5 × 50 mm68 parts4LNo license0AVR/Arduino
Mooltipass mini
limpkin
74.9 × 32.5 mm65 parts2LNo license528
How designs wire the LIS2HH12
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the LIS2HH12 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 µF).
- The VDD_IO pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 µF).
- The RES pin is tied to GND on 8 of 8 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SCL/SPCpin 1 | Connected to: The microcontroller 50%, a connector 25% |
|
| CSpin 2 | Connected to: The microcontroller 25% · 3.3V 38% |
|
| SDA/SDIpin 4 | Connected to: The microcontroller 63%, a connector 25% |
|
| RESpin 5 | Connected to: GND 100% | — |
| GNDpin 6, 7, 8 | Connected to: GND 100% | — |
| VDDpin 9 | Connected to: 3.3V 88% |
|
| VDD_IOpin 10 | Connected to: 3.3V 88% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mooltipass mini by limpkin, ZynqPCB by juliancoy, Neoswordkicad by wrickert and Hw amp by intentfulmotion.
The LIS2HH12 in open source designs
The gallery holds 8 open source boards using the LIS2HH12 from 8 GitHub repositories; a typical one measures about 72 × 55 mm and carries around 69 components.
57% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.
The most starred is Mooltipass mini by limpkin.
Parts used alongside the LIS2HH12
Microcontrollers on boards using the LIS2HH12
What boards using the LIS2HH12 are built for
LIS2HH12: common questions
Where can I find a LIS2HH12 reference design?
Each of the 8 boards on this page is a real design using the LIS2HH12. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LIS2HH12 VDD pin?
The VDD pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the LIS2HH12.
What decoupling capacitors do designs use on the LIS2HH12 VDD_IO pin?
The VDD_IO pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the LIS2HH12.
How is the LIS2HH12 RES pin connected?
The RES pin is tied to GND on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the LIS2HH12.
Which microcontrollers do boards using the LIS2HH12 use?
Most are built on ESP32 (4), STM32 (2), AVR/Arduino (1) and FPGA (1).
How big is a typical board using the LIS2HH12?
The median is 72 × 55 mm, and 57% are two-layer designs.
What is the most popular open source board using the LIS2HH12?
By GitHub stars, Mooltipass mini by limpkin, with 528 stars.
Can I simulate one of these boards using the LIS2HH12 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.