Kicad test redo w MPR121
About the Kicad test redo w MPR121 PCB
Kicad test redo w MPR121 is an open source PCB design by maxsterl666, published on GitHub. It is a 4-layer board measuring 160 × 180 mm, with 47 components from 27 distinct parts.
Other key parts include the L293D, MPR121QR2, YAAJ_DCDC_STEPDOWN_LM2596 and Mini360_Module. By type, the board carries 18 connectors, 14 capacitors, 8 resistors, 4 ICs, 2 transistors and 1 module.
From the project
Moonlit Surface MK1
Main components on the Kicad test redo w MPR121
Kicad test redo w MPR121 bill of materials (BOM)
47 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | L293D TB6612FNG | SSOP-24_5.3x8.2mm_P0.65mm | U1, U2 |
| 1 | MPR121QR2 | UQFN-20_3x3mm_P0.4mm | U3 |
| 1 | YAAJ_DCDC_STEPDOWN_LM2596 74VHC14D_118 | SO14_SOT108-1_NEX | U5 |
| 1 | Mini360_Module | Mini360_Module | A2 |
| 2 | BSS138 | SOT-23 | Q1, Q2 |
| 1 | FADER_1 | JST_EH_S6B-EH_1x06_P2.50mm_Horizontal | J1 |
| 1 | FADER_2 | JST_EH_S6B-EH_1x06_P2.50mm_Horizontal | J2 |
| 1 | FADER_3 | JST_EH_S6B-EH_1x06_P2.50mm_Horizontal | J3 |
| 1 | FADER_4 | JST_EH_S6B-EH_1x06_P2.50mm_Horizontal | J4 |
| 1 | 12V | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J5 |
| 1 | 12V | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | USB Host | GCT_USB1130-15-A_REVA | J8 |
| 1 | C_POT 4 | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J9 |
| 1 | C_POT 3 | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J10 |
| 1 | C_POT 2 | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J11 |
| 1 | C_POT 1 | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J12 |
| 1 | TX/RX 2 | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J13 |
| 1 | CS/RS OLED | JST_PH_S7B-PH-K_1x07_P2.00mm_Horizontal | J14 |
| 2 | 3.3V SPI LED's | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J15, J17 |
| 1 | 3.3V SPI OLED | JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J16 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_01X08_PIN BANKS | JST_PH_S5B-PH-K_1x05_P2.00mm_Horizontal | J18 |
| 1 | 3.3V | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J19 |
| 12 | CC0402ZRY5V7BB103 .1 uf | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C7, C8, C9, C10 +4 |
| 2 | EEU-EB1E101S 100 uf | C_1206_3216Metric | C5, C6 |
| 1 | RC0805FR-071M62L 10k | R_0805_2012Metric | R1 |
| 1 | RC0805FR-071M62L 75k | R_0805_2012Metric | R2 |
| 6 | RC0805JR-074K7L 4.7k | R_0805_2012Metric | R3, R4, R5, R6, R7, R8 |
Kicad test redo w MPR121 design files
The KiCad project lives in the maxsterl666/MLSMK1 repository on GitHub; these links point at the commit this page was built from.
Kicad test redo w MPR121: common questions
How big is the Kicad test redo w MPR121 PCB?
The Kicad test redo w MPR121 measures 160 × 180 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Kicad test redo w MPR121?
47 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Kicad test redo w MPR121 design files?
From the maxsterl666/MLSMK1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Kicad test redo w MPR121 design in my own project?
The repository has no license, so all rights stay with maxsterl666. Use it as a reference, and ask the author before reusing the design.
More boards in MLSMK1
8 x 8 LED Matrix Display
193 × 63.5 mm68 parts2LNo license0
AVR/ArduinoKicad test redo
161.8 × 180 mm50 parts4LNo license0
AVR/ArduinoKicad test
179 × 68.3 mm46 parts4LNo license0
Button vu
160 × 149 mm19 parts2LNo license0
AVR/ArduinoMotor redo
156 × 78.5 mm13 parts2LNo license0
Oled
204.8 × 34.3 mm5 parts2LNo license0