Kicad test redo
About the Kicad test redo PCB
Kicad test redo is an open source AVR/Arduino PCB design by maxsterl666, published on GitHub. It is a 4-layer board measuring 161.8 × 180 mm, with 50 components from 33 distinct parts.
Its main chip is the ARDUINO_NANO_V3.X, from the AVR/Arduino family. Other key parts include the TEENSY 4.1, L293D, Arduino_Micro, 757 and YAAJ_DCDC_StepDown_LM2596. By type, the board carries 22 connectors, 11 capacitors, 10 resistors, 6 ICs and 1 module.
From the project
Moonlit Surface MK1
Main components on the Kicad test redo
Kicad test redo bill of materials (BOM)
50 components, 33 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TEENSY 4.1 TEENSY_4.1 | TEENSY41 | IC1 |
| 1 | L293D | SOIC127P1032X265-20N | U1 |
| 1 | L293D | SOIC127P1032X265-20N | U3 |
| 1 | Arduino_Micro | Arduino_Micro | U7 |
| 1 | 757 | MODULE_757 | U8 |
| 1 | YAAJ_DCDC_StepDown_LM2596 | YAAJ_DCDC_StepDown_LM2596 | U9 |
| 1 | ARDUINO_NANO_V3.X Arduino_Nano_v3.x | Arduino_Nano | A1 |
| 1 | FADER_1 | JST_EH_S6B-EH_1x06_P2.50mm_Horizontal | J1 |
| 1 | FADER_2 | JST_EH_S6B-EH_1x06_P2.50mm_Horizontal | J2 |
| 1 | FADER_3 | JST_EH_S6B-EH_1x06_P2.50mm_Horizontal | J3 |
| 1 | FADER_4 | JST_EH_S6B-EH_1x06_P2.50mm_Horizontal | J4 |
| 1 | C_POT 4 | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J6 |
| 1 | C_POT 3 | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J7 |
| 1 | C_POT 2 | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J8 |
| 1 | 12V | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J9 |
| 1 | USB Host | PinHeader_1x05_P2.54mm_Vertical | J10 |
| 1 | C_POT 1 | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J11 |
| 1 | 12V | PinHeader_1x02_P2.54mm_Vertical | J12 |
| 1 | 10V | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J13 |
| 1 | 5V | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J14 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 3.3V CS/RS OLED | JST_PH_S7B-PH-K_1x07_P2.00mm_Horizontal | J15 |
| 1 | 3.3V 5V | PinHeader_1x02_P2.54mm_Vertical | J16 |
| 1 | 3.3V SPI LED's | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J17 |
| 1 | CONN_01X08_PIN SPI OLED | JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J18 |
| 2 | 3.3V | PinHeader_1x02_P2.54mm_Vertical | J19, J21 |
| 1 | BANKS | JST_PH_S5B-PH-K_1x05_P2.00mm_Horizontal | J20 |
| 1 | SPI LED's | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J22 |
| 1 | TX/RX 2 | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J23 |
| 9 | .1 uf | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C9, C10, C11, C12, C17, C18 +1 |
| 2 | 100 uf | CP_Radial_D6.3mm_P2.50mm | C5, C6 |
| 4 | 2M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 2 | 4.7K 4.7k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 4 | 2K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8, R9, R10 |
Kicad test redo design files
The KiCad project lives in the maxsterl666/MLSMK1 repository on GitHub; these links point at the commit this page was built from.
Kicad test redo: common questions
What microcontroller does the Kicad test redo use?
The Kicad test redo is built around the ARDUINO_NANO_V3.X, from the AVR/Arduino family.
How big is the Kicad test redo PCB?
The Kicad test redo measures 161.8 × 180 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Kicad test redo?
50 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Kicad test redo design files?
From the maxsterl666/MLSMK1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Kicad test redo design in my own project?
The repository has no license, so all rights stay with maxsterl666. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Kicad test redo without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in MLSMK1
8 x 8 LED Matrix Display
193 × 63.5 mm68 parts2LNo license0
Kicad test redo w MPR121
160 × 180 mm47 parts4LNo license0
AVR/ArduinoKicad test
179 × 68.3 mm46 parts4LNo license0
Button vu
160 × 149 mm19 parts2LNo license0
AVR/ArduinoMotor redo
156 × 78.5 mm13 parts2LNo license0
Oled
204.8 × 34.3 mm5 parts2LNo license0
Similar boards
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoEasyduino Atmega
Hanqaqa
68.8 × 53.6 mm35 parts4LCERN-OHL-P-2.0746
AVR/ArduinoEasyduino Atmega Nano
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746
AVR/ArduinoUsbGpib
xyphro
54 × 15 mm21 parts2LMIT683
AVR/ArduinoLumberjack
peej
284.7 × 94.2 mm149 parts2LMIT402