DC Power Brick
MediBrick·DC_Power_Brick·KiCad/Power_Brick/Power_Brick/Power_Brick.kicad_pcb
About the DC Power Brick PCB
DC Power Brick is an open source PCB design by MediBrick, published on GitHub. It is a 2-layer board measuring 70 × 70 mm, with 94 components from 52 distinct parts.
Other key parts include the DRV8704DCPR and ADS1220xPW. By type, the board carries 35 capacitors, 32 resistors, 8 transistors, 7 connectors, 6 jumpers and 3 ICs.
It belongs with the sensors designs in this gallery.
From the project
The Power Brick can control power to resistive heater, thermo electric cooler/heater or DC motor. It requires 8V or larger input and might be able to handle 30A (4 oz copper).
The Power Brick can control power to resistive heater, thermo electric cooler/heater or DC motor. It requires 8V or larger input and might be able to handle 30A (4 oz copper).
This design requires that both temperature sensors are attached. If one is not populated, the measurement circuit is interrupted and no temperature is reported.
The following files were created for this project using KiCad.

Main components on the DC Power Brick
DC Power Brick bill of materials (BOM)
94 components, 52 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DRV8704DCPR | DCP0038A_N | U1 |
| 2 | ADS1220xPW | TSSOP-16_4.4x5mm_P0.65mm | U2, U3 |
| 4 | 60V CSD18540Q5B Texas Instruments | TRANS_CSD18540Q5B | Q1, Q2, Q3, Q4 |
| 4 | CSD18540Q5B | TRANS_CSD18540Q5B | Q5, Q6, Q7, Q8 |
| 1 | Conn_01x10 | PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | Conn_01x09 | PinHeader_1x09_P2.54mm_Vertical | J2 |
| 2 | MKDS5_2-9_5_1pos_PowerPad | MKDS5_2-9_5_1pos_PowerPad | J3, J4 |
| 1 | MKDS5_2-9_5_4pos_PowerPad | MKDS5_2-9_5_4pos_PowerPad | J5 |
| 2 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J6, J7 |
| 6 | Jumper_2_Bridged | Jumper_2_NO | JP1, JP2, JP3, JP4, JP5, JP6 |
| 1 | SMD_5.2x5.2mm_h1.9mm | Push_SMD_4.6x2.8mm_h1.9mm | SW1 |
| 1 | Red Lite-On | LED_0603_1608Metric_Red | D1 |
| 1 | Green Lite-On | LED_0603_1608Metric_Green | D2 |
| 1 | 470UF 0.1uF Panasonic | C_0402_1005Metric | C1 |
| 1 | 470UF 1.0uF Panasonic | C_0402_1005Metric | C2 |
| 1 | 4.7UF 1.0uF TDK | C_0402_1005Metric | C3 |
| 2 | 0.1UF 0.1uF Kemet | C_0603_1608Metric | C4, C11 |
| 3 | 1UF 10nF MuRata | C_0402_1005Metric | C5, C15, C16 |
| 2 | 1UF EEE-TK1J221AQ MuRata | CAP_PAN_EEE_H13_PAN | C6, C9 |
| 1 | EEE-TK1J221AQ DNP | CAP_PAN_EEE_H13_PAN | C7 |
Show 32 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0.1uF DNP | C_0603_1608Metric | C8 |
| 1 | 10UF EEE-TK1J221AQ MuRata | CAP_PAN_EEE_H13_PAN | C10 |
| 1 | 0.1UF 10nF TDK | C_0402_1005Metric | C12 |
| 8 | 10nF | C_0402_1005Metric | C13, C14, C23, C24, C25, C26, C27, C28 |
| 1 | 1000PF 10nF MuRata | C_0402_1005Metric | C17 |
| 2 | 0.1UF 0.1uF Kemet | C_0402_1005Metric | C18, C21 |
| 1 | 1UF 0.1uF MuRata | C_0402_1005Metric | C19 |
| 1 | 4.7UF 0.1uF TDK | C_0402_1005Metric | C20 |
| 1 | 1000PF 0.1uF MuRata | C_0402_1005Metric | C22 |
| 5 | 0.1uF | C_0402_1005Metric | C29, C30, C31, C32, C33 |
| 2 | 1.0nF | C_0402_1005Metric | C34, C35 |
| 2 | 200 Vishay-Dale | R_0402_1005Metric | R1, R3 |
| 4 | 10k Vishay-Dale | R_0402_1005Metric | R2, R12, R14, R16 |
| 1 | PA2512FKE7T0U5E Vishay-Dale | RES_PA2512_YAG | R4 |
| 1 | 100k DNP | R_0402_1005Metric | R6 |
| 1 | 10K 330 Vishay-Dale | R_0402_1005Metric | R7 |
| 1 | 3.3k DNP | R_0402_1005Metric | R8 |
| 1 | 0.01 PA2512FKE7T0U5E Bourns | RES_PA2512_YAG | R9 |
| 2 | 20k Vishay-Dale | R_0402_1005Metric | R10, R22 |
| 1 | 10K 0 Vishay-Dale | R_0402_1005Metric | R11 |
| 1 | 68K 10k Vishay-Dale | R_0402_1005Metric | R13 |
| 1 | 47K 10k Vishay-Dale | R_0402_1005Metric | R15 |
| 1 | 47K 22 Vishay-Dale | R_0402_1005Metric | R17 |
| 6 | 22 | R_0402_1005Metric | R18, R20, R21, R29, R32, R33 |
| 1 | 50K 22 Bourns | R_0402_1005Metric | R19 |
| 1 | 330 0 Vishay-Dale | R_0402_1005Metric | R23 |
| 2 | 330 10k Vishay-Dale | R_0402_1005Metric | R24, R25 |
| 1 | 4.99K 10k Vishay-Dale | R_0402_1005Metric | R26 |
| 1 | 200K 10k Vishay-Dale | R_0402_1005Metric | R27 |
| 1 | 33K 10k Vishay-Dale | R_0402_1005Metric | R28 |
| 1 | 7.5K 22 Vishay-Dale | R_0402_1005Metric | R30 |
| 1 | 10K 22 Vishay-Dale | R_0402_1005Metric | R31 |
DC Power Brick design files
The KiCad project lives in the MediBrick/DC_Power_Brick repository on GitHub; these links point at the commit this page was built from.
DC Power Brick: common questions
How big is the DC Power Brick PCB?
The DC Power Brick measures 70 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DC Power Brick?
94 components, from 52 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DC Power Brick design files?
From the MediBrick/DC_Power_Brick repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DC Power Brick design in my own project?
The repository has no license, so all rights stay with MediBrick. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956