6 open source boards using the ADS1220xPW

Real designs built with the ADS1220xPW, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the ADS1220xPW

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ADS1220xPW connects to, and the resistors, capacitors and other passives placed on it.

  • The CLK pin is tied to GND on 6 of 6 designs.
  • The AIN1 pin has a capacitor to GND on 4 of 6 designs, most often 10 nF (then 100 nF).
  • The AVDD pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF (then 10 µF).
  • The DVDD pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF (then 10 µF).
SCLKpin 1Connected to: Signal 83% · not connected 17%
  • Series resistor on 50% · 47 Ω (2), 22 Ω (1)
CSpin 2Connected to: Signal 83% · not connected 17%
  • Series resistor on 50% · 47 Ω (2), 22 Ω (1)
CLKpin 3Connected to: GND 100%
DGNDpin 4Connected to: GND 100%
AVSSpin 5Connected to: GND 100%
AIN3/REFN1pin 6Connected to: Signal 67% · not connected 17% · GND 17%
  • Resistor to GND on 33% · 47 kΩ (1)
  • Capacitor to GND on 33% · 100 nF (1), 10 nF (1)
  • Series resistor on 33% · 47 kΩ (1), 10 kΩ (1)
AIN2pin 7Connected to: Signal 67% · not connected 17% · GND 17%
  • Capacitor to GND on 50% · 10 nF (2), 100 nF (1)
  • Resistor to GND on 33% · 47 kΩ (1)
  • Series capacitor on 33% · 100 nF (2)
  • Series resistor on 33% · 10 kΩ (1), 100 Ω (1)
AIN1pin 10Connected to: Signal 67% · VREF 33%
  • Capacitor to GND on 67% · 10 nF (2), 100 nF (1)
  • Series capacitor on 50% · 100 nF (3)
  • Series resistor on 50% · 100 Ω (2), 10 kΩ (1)
AIN0/REFP1pin 11Connected to: Signal 83% · 4.5V 17%
  • Series capacitor on 50% · 100 nF (2), 360 pF (1)
  • Series resistor on 50% · 100 Ω (1), 2 GΩ (1), 10 kΩ (1)
  • Capacitor to GND on 50% · 100 nF (1), 10 nF (1)
  • Resistor to GND on 33% · 10 kΩ (1)
AVDDpin 12Connected to: 3.3V 100%
  • Decoupling capacitor on 67% · 100 nF (7), 10 µF (2)
DVDDpin 13Connected to: 3.3V 100%
  • Decoupling capacitor on 67% · 100 nF (5), 10 µF (1)
DRDYpin 14Connected to: Signal 67% · not connected 33%
  • Series resistor on 33% · 47 Ω (1), 22 Ω (1)
DOUT/DRDYpin 15Connected to: Signal 83% · not connected 17%
  • Series resistor on 50% · 47 Ω (2), 22 Ω (1)
DINpin 16Connected to: Signal 83% · not connected 17%
  • Series resistor on 50% · 47 Ω (2), 22 Ω (1)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Plimsoll by mulcmu, ChrisBox by TUDA-MUST, Ember v0.2 by IITB-Rocket-Team-Avionics and FlexNode by AleksaHeler.

The ADS1220xPW in open source designs

The gallery holds 6 open source boards using the ADS1220xPW from 6 GitHub repositories; a typical one measures about 76.5 × 84.8 mm and carries around 136 components.

67% use four copper layers or more, and 67% carry an open source license.

The most starred is Plimsoll by mulcmu.

Microcontrollers on boards using the ADS1220xPW

What boards using the ADS1220xPW are built for

ADS1220xPW: common questions

Where can I find a ADS1220xPW reference design?

Each of the 6 boards on this page is a real design using the ADS1220xPW. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ADS1220xPW CLK pin connected?

The CLK pin is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the ADS1220xPW.

How is the ADS1220xPW AIN1 pin connected?

The AIN1 pin has a capacitor to GND on 4 of 6 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the ADS1220xPW.

What decoupling capacitors do designs use on the ADS1220xPW AVDD pin?

The AVDD pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the ADS1220xPW.

Which microcontrollers do boards using the ADS1220xPW use?

Most are built on ESP32 (2), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the ADS1220xPW?

The median is 76.5 × 84.8 mm, and 33% are two-layer designs.

What is the most popular open source board using the ADS1220xPW?

By GitHub stars, Plimsoll by mulcmu, with 12 stars.

Can I simulate one of these boards using the ADS1220xPW before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part