Generic USB FT232 RL
About the Generic USB FT232 RL PCB
Generic USB FT232 RL is an open source PCB design by mekatronik-achmadi, published on GitHub. It is a 2-layer board measuring 40.4 × 24.4 mm, with 15 components from 10 distinct parts.
Other key parts include the FT232RL. By type, the board carries 5 resistors, 4 connectors, 3 diodes, 2 capacitors and 1 IC.
It belongs with the usb & debug tools designs in this gallery.
From the project
Store My Personal Examples on Development Topics
Main components on the Generic USB FT232 RL
Generic USB FT232 RL bill of materials (BOM)
15 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FT232RL | SSOP-28_5.3x10.2mm_P0.65mm | U1 |
| 1 | Conn_01x03_Male | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x05_Male | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | USB_B_Micro | USB_Micro-B_Wuerth_629105150521 | J3 |
| 1 | Conn_01x06_Female | PinSocket_1x06_P2.54mm_Vertical | J-HC51 |
| 3 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3 |
| 1 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 2 | 0 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 3 | 330 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5 |
Generic USB FT232 RL design files
The KiCad project lives in the mekatronik-achmadi/example_collection repository on GitHub; these links point at the commit this page was built from.
Generic USB FT232 RL: common questions
How big is the Generic USB FT232 RL PCB?
The Generic USB FT232 RL measures 40.4 × 24.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Generic USB FT232 RL?
15 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Generic USB FT232 RL design files?
From the mekatronik-achmadi/example_collection repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Generic USB FT232 RL design in my own project?
The repository has no license, so all rights stay with mekatronik-achmadi. Use it as a reference, and ask the author before reusing the design.
More boards in example_collection
LED16SMD
49.2 × 29.3 mm36 parts2LNo license2
STM32STM32 LQFP64 Minimum System
69.4 × 37.9 mm34 parts2LNo license2
ESP32Oledsndio
87.7 × 49.2 mm33 parts2LNo license2
Nucleo shield
70.9 × 66.5 mm31 parts2LNo license2
STM32Philcoba
46 × 28 mm30 parts2LNo license2
STM32Stm32pp
59.8 × 34.2 mm30 parts2LNo license2
AVR/ArduinoGeneric USBAsp
47.3 × 25 mm23 parts2LNo license2
Papank
45.4 × 27.7 mm18 parts2LNo license2
ESP8266Minimal ESP-12F Module
49.6 × 27.3 mm17 parts2LNo license2
UVW BLDC Controller
52.4 × 51.5 mm16 parts2LNo license2
Uvled
24.5 × 25.4 mm10 parts2LNo license2
Similar boards
XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703
USB Hub Test
50 × 50 mm85 parts4LCC-BY-4.0703
FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0490
Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389
Adapter tsop48 solder
48 × 33 mm3 parts2LGPL-3.0389
Adapter soic8 solder
48 × 20 mm3 parts2LGPL-3.0389