Nucleo shield
About the Nucleo shield
Nucleo shield is an open source PCB design by mekatronik-achmadi, published on GitHub. It is a 2-layer board measuring 70.9 × 66.5 mm, with 31 components from 18 distinct parts.
Other key parts include the NUCLEO-F401RE, CH340G and AMS1117-3.3. By type, the board carries 11 resistors, 5 connectors, 4 capacitors, 3 ICs, 3 diodes and 2 switches.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Store My Personal Examples on Development Topics
Main components on the Nucleo shield
Nucleo shield bill of materials (BOM)
31 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NUCLEO-F401RE | ST_NUCLEO-F401RE | U1 |
| 1 | CH340G | SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | 12MHz | Crystal_HC49-4H_Vertical | Y1 |
| 1 | USB_B_Micro | USB_Micro-B_Wuerth_629105150521 | J1 |
| 2 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J2, J5 |
| 2 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J3, J4 |
| 1 | ST-TF-003A MICRO-SD-CARD-SOCKET-9P_ST-TF-003A_ | MICRO-SD9+4P-SMD-16.1X14.5X1.85MM | SD1 |
| 2 | SW_Push | SW_PUSH_6mm | SW1, SW2 |
| 1 | SSD1306 | 128x64OLED | Brd1 |
| 1 | IJO | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | ABANG | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | BIRU | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 2 | 22pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 10uF | CP_Elec_4x5.3 | C3, C4 |
| 3 | 330 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R7, R8 |
| 7 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R5, R6, R9, R10 |
| 1 | 0 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
Nucleo shield design files
The KiCad project lives in the mekatronik-achmadi/example_collection repository on GitHub; these links point at the commit this page was built from.
Nucleo shield: common questions
How big is the Nucleo shield?
The Nucleo shield measures 70.9 × 66.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Nucleo shield?
31 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Nucleo shield design files?
From the mekatronik-achmadi/example_collection repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Nucleo shield design in my own project?
The repository has no license, so all rights stay with mekatronik-achmadi. Use it as a reference, and ask the author before reusing the design.
More boards in example_collection
LED16SMD
49.2 × 29.3 mm36 parts2LNo license2
STM32STM32 LQFP64 Minimum System
69.4 × 37.9 mm34 parts2LNo license2
ESP32Oledsndio
87.7 × 49.2 mm33 parts2LNo license2
STM32Stm32pp
59.8 × 34.2 mm30 parts2LNo license2
STM32Philcoba
46 × 28 mm30 parts2LNo license2
AVR/ArduinoGeneric USBAsp
47.3 × 25 mm23 parts2LNo license2
Papank
45.4 × 27.7 mm18 parts2LNo license2
ESP8266Minimal ESP-12F Module
49.6 × 27.3 mm17 parts2LNo license2
UVW BLDC Controller
52.4 × 51.5 mm16 parts2LNo license2
Generic USB FT232 RL
40.4 × 24.4 mm15 parts2LNo license2
Uvled
24.5 × 25.4 mm10 parts2LNo license2
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979