Htl day demo projects
melektron·htl_day_demo_projects·esp_lichtstreifen/hardware/ultrasonic_lightstrip.kicad_pcb
About the Htl day demo projects PCB
Htl day demo projects is an open source ESP32 PCB design by melektron, published on GitHub. It is a 2-layer board measuring 83.8 × 68.6 mm, with 8 components from 8 distinct parts.
Its main chip is the ESP32-DevKitC, from the ESP32 family. By type, the board carries 4 connectors, 2 capacitors, 1 IC and 1 resistor.
It belongs with the displays & leds designs in this gallery.
From the project
This board connects an HC-SR04 ultrasonic sensor, OLED display and WS2812B LED-Strip to an ESP32 DevKitC. It also includes a barrel jack for power.
This board connects an HC-SR04 ultrasonic sensor, OLED display and WS2812B LED-Strip to an ESP32 DevKitC. It also includes a barrel jack for power.
This project requires the Espressif KiCAD libs.
Main components on the Htl day demo projects
Htl day demo projects bill of materials (BOM)
8 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-DevKitC | ESP32-DevKitC | U1 |
| 1 | Barrel_Jack_Switch | BarrelJack_Horizontal | J1 |
| 1 | HC-SR04 | PinSocket_1x04_P2.54mm_Horizontal | J2 |
| 1 | WS2812B | PinHeader_1x04_P2.54mm_Horizontal | J3 |
| 1 | OLED | PinSocket_1x04_P2.54mm_Vertical | J4 |
| 1 | 100n | C_Disc_D6.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 47u | CP_Radial_D8.0mm_P3.80mm | C2 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
Htl day demo projects design files
The KiCad project lives in the melektron/htl_day_demo_projects repository on GitHub; these links point at the commit this page was built from.
Htl day demo projects: common questions
What microcontroller does the Htl day demo projects use?
The Htl day demo projects is built around the ESP32-DevKitC, from the ESP32 family.
How big is the Htl day demo projects PCB?
The Htl day demo projects measures 83.8 × 68.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Htl day demo projects?
8 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Htl day demo projects design files?
From the melektron/htl_day_demo_projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Htl day demo projects design in my own project?
The repository has no license, so all rights stay with melektron. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Htl day demo projects without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k