HardLabs

Version1

meyerAurelius·telemetry-pcb·big_board/version1/version1.kicad_pcb

Version1 PCB layout, top view — open source ESP32 board by meyerAurelius

About the Version1 PCB

Version1 is an open source ESP32 PCB design by meyerAurelius, published on GitHub. It is a 4-layer board measuring 60 × 57.8 mm, with 16 components from 13 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N16R2, from the ESP32 family. Other key parts include the ADS1115LIDGSR, TJA1050T/CM,118 and AMS1117-3.3. By type, the board carries 4 ICs, 4 resistors, 3 LEDs, 2 connectors, 2 switches and 1 capacitor.

From the project

First iteration of the telemetry PCB for UCalgary BAJA

Main components on the Version1

ADS1115LIDGSRESP32-S3-WROOM-1-N16R2TJA1050T/CM,118AMS1117-3.3

Version1 bill of materials (BOM)

16 components, 13 distinct parts.

QtyPartRefs
1
ADS1115LIDGSR
IC1
1
ESP32-S3-WROOM-1-N16R2
IC2
1
TJA1050T/CM,118
TJA1050T_CM,118
IC3
1
AMS1117-3.3
IC4
1
BM04B-GVHS-TB(LF)(SN)
BM04B-GVHS-TB_LF__SN_
J1
1
OSTTE040104
J2
2
TL3301FF160QG
S1, S2
1
150080BS75000
BLINK_LED1
1
150080GS75000
CAN_LED1
1
150080RS75000
PWR_LED1
1
C0603C104K5RACTU
C1
1
RR0816P-103-D
R1
3
RC0603FR-07220RL
R2, R3, R4

Version1 design files

The KiCad project lives in the meyerAurelius/telemetry-pcb repository on GitHub; these links point at the commit this page was built from.

Version1: common questions

What microcontroller does the Version1 use?

The Version1 is built around the ESP32-S3-WROOM-1-N16R2, from the ESP32 family.

How big is the Version1 PCB?

The Version1 measures 60 × 57.8 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Version1?

16 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the Version1 design files?

From the meyerAurelius/telemetry-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Version1 design in my own project?

The repository has no license, so all rights stay with meyerAurelius. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Version1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in telemetry-pcb

Similar boards