HardLabs

ArduinoShieldServoMotors

michaelshiloh·resourcesForClasses·kicad/ArduinoShieldServoMotors/ArduinoShieldServoMotors.kicad_pcb

ArduinoShieldServoMotors PCB layout, top view — open source board by michaelshiloh

About the ArduinoShieldServoMotors PCB

ArduinoShieldServoMotors is an open source PCB design by michaelshiloh, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 68.6 × 53.3 mm, with 14 components from 8 distinct parts.

By type, the board carries 4 modules, 4 connectors, 4 diodes and 1 capacitor.

It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.

From the project

Some PCBs I have designed to help with my classes and other projects: - ArduinoShieldHobbyRCAndMotorControl: Holes for 6 wires to connect to an L298 (or similary) dual H-bridge motor driver, and six connectors suitable for a hobby RC receiver. Used in Performing Robots but could

Some PCBs I have designed to help with my classes and other projects: - ArduinoShieldHobbyRCAndMotorControl: Holes for 6 wires to connect to an L298 (or similary) dual H-bridge motor driver, and six connectors suitable for a hobby RC receiver. Used in Performing Robots but could be useful to anyone connecting an Arduino Uno to a hobby RC receiver or an L298 dual H-bridge motor driver. - ICsockets/16PinSocketAPC: breakout board for a 14 pin DIP, with silkscreen markings aimed at making at Atari Punk Console. I'll add a link to the full instructions when I find them. - nRFservoMega: Arduino…

ArduinoShieldServoMotors bill of materials (BOM)

14 components, 8 distinct parts.

QtyPartRefs
4
Conn_01x03
A0, A1, A2, A3
1
Power
J1
1
Digital/PWM
J2
1
Analog
J3
1
Digital/PWM
J4
1
Screw_Terminal_01x02
+__5V__-1
4
Conn_01x03
D2, D4, D7, D8
1
470 ufd
C1

ArduinoShieldServoMotors design files

The KiCad project lives in the michaelshiloh/resourcesForClasses repository on GitHub; these links point at the commit this page was built from.

ArduinoShieldServoMotors: common questions

How big is the ArduinoShieldServoMotors PCB?

The ArduinoShieldServoMotors measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ArduinoShieldServoMotors?

14 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the ArduinoShieldServoMotors design files?

From the michaelshiloh/resourcesForClasses repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ArduinoShieldServoMotors design in my own project?

Yes, under the terms of its AGPL-3.0 license, which michaelshiloh chose for the repository.

More boards in resourcesForClasses

Similar boards