HardLabs

Mega nRF feedthrough

michaelshiloh·resourcesForClasses·kicad/mega_nRF_feedthrough/mega_nRF_feedthrough.kicad_pcb

Mega nRF feedthrough PCB layout, top view — open source AVR/Arduino board by michaelshiloh
Simulate this board

About the Mega nRF feedthrough PCB

Mega nRF feedthrough is an open source AVR/Arduino PCB design by michaelshiloh, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 99.3 × 53.6 mm, with 7 components from 6 distinct parts.

Its main chip is the Arduino_Mega2560_R3_Shield, from the AVR/Arduino family. Other key parts include the NRF24L01_Breakout and AP2127N-3.3. By type, the board carries 4 capacitors, 2 ICs and 1 module.

It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.

From the project

Some PCBs I have designed to help with my classes and other projects: - ArduinoShieldHobbyRCAndMotorControl: Holes for 6 wires to connect to an L298 (or similary) dual H-bridge motor driver, and six connectors suitable for a hobby RC receiver. Used in Performing Robots but could

Some PCBs I have designed to help with my classes and other projects: - ArduinoShieldHobbyRCAndMotorControl: Holes for 6 wires to connect to an L298 (or similary) dual H-bridge motor driver, and six connectors suitable for a hobby RC receiver. Used in Performing Robots but could be useful to anyone connecting an Arduino Uno to a hobby RC receiver or an L298 dual H-bridge motor driver. - ICsockets/16PinSocketAPC: breakout board for a 14 pin DIP, with silkscreen markings aimed at making at Atari Punk Console. I'll add a link to the full instructions when I find them. - nRFservoMega: Arduino…

Main components on the Mega nRF feedthrough

NRF24L01_BreakoutAP2127N-3.3Arduino_Mega2560_R3_Shield

Mega nRF feedthrough bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
NRF24L01_Breakout
U1
1
AP2127N-3.3
U2
1
Arduino_Mega2560_R3_Shield
A1
2
1uF
C1, C2
1
470uF
C3
1
3.3 uf
C4

Mega nRF feedthrough design files

The KiCad project lives in the michaelshiloh/resourcesForClasses repository on GitHub; these links point at the commit this page was built from.

Mega nRF feedthrough: common questions

What microcontroller does the Mega nRF feedthrough use?

The Mega nRF feedthrough is built around the Arduino_Mega2560_R3_Shield, from the AVR/Arduino family.

How big is the Mega nRF feedthrough PCB?

The Mega nRF feedthrough measures 99.3 × 53.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Mega nRF feedthrough?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Mega nRF feedthrough design files?

From the michaelshiloh/resourcesForClasses repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Mega nRF feedthrough design in my own project?

Yes, under the terms of its AGPL-3.0 license, which michaelshiloh chose for the repository.

Can I test firmware for the Mega nRF feedthrough without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in resourcesForClasses

Similar boards