39 open source boards using the ESP32-C3-WROOM-02-H4
Real designs built with the ESP32-C3-WROOM-02-H4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ESP32 BASED PCB
BitwiseAjeet
98 × 55.5 mm81 parts4LMIT6ESP32
Gulu ESP32-C3 ePaper
Plaenkler
54.8 × 28.1 mm34 parts2LBSD-3-Clause6ESP32
ESP32 IoT Dev Board
EngMeesh
82.9 × 53.8 mm85 parts4LMIT1ESP32
ESP32-IoT-Development-Board
riteshsalikeripatil
88.7 × 55.6 mm85 parts4LMIT1ESP32
Iot esp32-hw
sourabh-devrukhkar
89.9 × 52.8 mm85 parts4LMIT1ESP32
Esp devboard prateek
Prateek-elec
79.8 × 55.3 mm82 parts4LMIT1ESP32
Esp32-c3-02-KiCAD-Design
kaushal1020
79.3 × 53.6 mm80 parts4LNo license1ESP32
--SmartAgri-Node---The-All in-One-Environmental-Intelligence-Board--ESP32-C3-
tashfeen-electronics
89.5 × 55 mm80 parts4LMIT1ESP32
ESP32-C3-IoT-Embedded-Custom
SarthakDas2006
85.7 × 58.1 mm80 parts4LNo license1ESP32
ESP32-RS485-Lipo Battery
SushantSaroch13
75.1 × 60 mm63 parts4LNo license1ESP32
Secure edge logger
landjas09
87.5 × 54.7 mm92 parts4LNo license0ESP32
ESP32 sensor board
D76X
89.9 × 52.8 mm85 parts4LNo license0ESP32
ESP32-sensor board
chopda15
107.6 × 55 mm85 parts4LNo license0ESP32
Embedded projects
dashonigkuchen
63 × 73.2 mm85 parts6LMIT0ESP32
ESP32 based dev board
harris8099
84.5 × 54.8 mm85 parts4LNo license0ESP32
ESP32-C3-WROOM-02-H4
John-Coding-c
89.9 × 52.8 mm85 parts4LNo license0ESP32
Revision-Project-4 layer-PCB-with
Waqar-98
89.9 × 52.8 mm84 parts4LNo license0ESP32
ESP32
Chockalingam-M
75.5 × 53.2 mm82 parts4LNo license0ESP32
Esp32-iot board project
Iamshubham3
86.5 × 51.5 mm81 parts4LNo license0ESP32
Esp32-4layer iot board
gitRaksha
84.8 × 53.3 mm80 parts4LMIT0ESP32
Esp32-sensor board
marwantm
99.6 × 55.9 mm80 parts4LNo license0ESP32
ESP32-IoT-Sensor-Hub-Manufacturing-Ready-
Asaf66
79.5 × 61.4 mm80 parts4LNo license0ESP32
Udemy-Course
shreyashswarnkar210205
96.2 × 58 mm80 parts4LNo license0ESP32
ESP32-C3-IoT-Dev-Board
Kaushalyasamantha
93 × 56.3 mm80 parts4LNo license0ESP32
ESP32-C3-IoT-Board
PascalMALLE
81.3 × 52.9 mm79 parts4LNo license0ESP32
ESP32-Multi-Sensor
ashfaque-ur-rahman
90.1 × 54.7 mm78 parts4LNo license0ESP32
Wmc sensor proto
gfschwengle
85.3 × 48.3 mm76 parts4LNo license0ESP32
ESP32 IOT Board
PotatoPerchance
82.8 × 58.4 mm74 parts4LNo license0ESP32
Solar proa network server
shipshape-marine
51.5 × 62.5 mm59 parts2LNo license0ESP32
ScaleController RevA
smaegley
89.9 × 52.8 mm44 parts4LCERN-OHL-S-2.00ESP32
ESP32
shelxty
31 × 38.5 mm29 parts4LNo license0ESP32
Module esp32
MikkoTervala
50 × 25 mm20 parts2LNo license0ESP32
ESP32 12v Relay
CF209
54.1 × 54.1 mm47 parts4LNo license2ESP32
Tutorial03-ESP32-IoT-4-layer
D76X
88 × 55.8 mm83 parts4LNo license0ESP32
IOT DEV BOARD
landjas09
81.2 × 54.7 mm81 parts4LNo license0ESP32
ESP32 sensor board
rompasaurus
89.9 × 52.8 mm85 parts4LNo license2
How designs wire the ESP32-C3-WROOM-02-H4
Read from the KiCad layouts of 36 open source designs, one per repository: what each pin of the ESP32-C3-WROOM-02-H4 connects to, and the resistors, capacitors and other passives placed on it.
- The EN pin has a capacitor to GND on 35 of 36 designs, most often 1 µF (then 100 nF).
- The EN pin has a pull-up to 3.3V on 35 of 36 designs, most often 10 kΩ.
- The IO9 pin has a capacitor to GND on 31 of 36 designs, most often 100 nF (then 1 µF).
- The 3V3 pin is tied to 3.3V on 36 of 36 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 3V3pin 1 | Connected to: 3.3V 100% | — |
| ENpin 2 | Connected to: Signal 100% |
|
| IO4pin 3 | Connected to: A connector 89%, BME280 75% |
|
| IO5pin 4 | Connected to: MAX4466EXK 44%, a connector 39% |
|
| IO6pin 5 | Connected to: Signal 100% |
|
| IO7pin 6 | Connected to: Signal 100% |
|
| IO9pin 8 | Connected to: Signal 100% |
|
| GNDpin 9, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39 | Connected to: GND 100% | — |
| IO3pin 15 | Connected to: A connector 89%, BME280 75% |
|
| IO2pin 16 | Connected to: Signal 100% |
|
| IO1pin 17 | Connected to: Signal 92% |
|
| IO0pin 18 | Connected to: A connector 50% |
|
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32 BASED PCB-KiCAD by BitwiseAjeet, Gulu ESP32-C3 ePaper by Plaenkler, ESP32 12v Relay by CF209 and ESP32 PCB LAYOUT AJEET by rompasaurus.
The ESP32-C3-WROOM-02-H4 in open source designs
The gallery holds 39 open source boards using the ESP32-C3-WROOM-02-H4 from 36 GitHub repositories; a typical one measures about 86.5 × 54.7 mm and carries around 81 components.
92% use four copper layers or more, and 26% carry an open source license.
The most starred is ESP32 BASED PCB-KiCAD by BitwiseAjeet.
Parts used alongside the ESP32-C3-WROOM-02-H4
Microcontrollers on boards using the ESP32-C3-WROOM-02-H4
What boards using the ESP32-C3-WROOM-02-H4 are built for
ESP32-C3-WROOM-02-H4: common questions
Where can I find a ESP32-C3-WROOM-02-H4 reference design?
Each of the 39 boards on this page is a real design using the ESP32-C3-WROOM-02-H4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32-C3-WROOM-02-H4 EN pin connected?
The EN pin has a capacitor to GND on 35 of 36 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 36 open source designs using the ESP32-C3-WROOM-02-H4.
How is the ESP32-C3-WROOM-02-H4 IO9 pin connected?
The IO9 pin has a capacitor to GND on 31 of 36 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 36 open source designs using the ESP32-C3-WROOM-02-H4.
How is the ESP32-C3-WROOM-02-H4 3V3 pin connected?
The 3V3 pin is tied to 3.3V on 36 of 36 designs. Counted from the KiCad layouts of 36 open source designs using the ESP32-C3-WROOM-02-H4.
What parts are used alongside the ESP32-C3-WROOM-02-H4?
The USBLC6-2SC6, BME280, W25Q32JVSSIQ, MAX4466EXK and CP2102N-Axx-xQFN20 appear in the most repositories here.
Which microcontrollers do boards using the ESP32-C3-WROOM-02-H4 use?
Most are built on ESP32 (39).
How big is a typical board using the ESP32-C3-WROOM-02-H4?
The median is 86.5 × 54.7 mm, and 8% are two-layer designs.
What is the most popular open source board using the ESP32-C3-WROOM-02-H4?
By GitHub stars, ESP32 BASED PCB-KiCAD by BitwiseAjeet, with 6 stars.
Can I simulate one of these boards using the ESP32-C3-WROOM-02-H4 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.