Half life week-3
miles-h3·half-life-week-3
About the Half life week-3 PCB
Half life week-3 is an open source ESP32 PCB design by miles-h3, published on GitHub. It is a 2-layer board measuring 91.3 × 66.8 mm, with 9 components from 5 distinct parts.
Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 4 switches, 3 diodes, 1 IC and 1 connector.
It belongs with the audio, keyboards and displays & leds designs in this gallery.
From the project
FUNCTION: One's inherent electrical field interacts with the capacitive keys on the pcb and plays a corresponding sound to the key "pressed." Additionally, the switches above the capacitive keys perform the same function though they havae a more physical response to one's touch.
Main components on the Half life week-3
Half life week-3 bill of materials (BOM)
9 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Waveshare ESP32-S3-ZERO | Waveshare ESP32-S3-Zero | U1 |
| 1 | Conn_01x07 | capacitive keys | J1 |
| 3 | SW_Push | Kailh Choc Low-Profile Switches | SW1, SW2, SW3 |
| 1 | RotaryEncoder_Switch_MP | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW4 |
| 3 | SK6812MINI-E | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D1, D2, D3 |
Half life week-3 design files
The KiCad project lives in the miles-h3/half-life-week-3 repository on GitHub; these links point at the commit this page was built from.
- Layoutmidi_keyboard.kicad_pcb
- Schematicmidi_keyboard.kicad_sch
Half life week-3: common questions
What microcontroller does the Half life week-3 use?
The Half life week-3 is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.
How big is the Half life week-3 PCB?
The Half life week-3 measures 91.3 × 66.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Half life week-3?
9 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Half life week-3 design files?
From the miles-h3/half-life-week-3 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Half life week-3 design in my own project?
The repository has no license, so all rights stay with miles-h3. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Half life week-3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k