Calipers
mirdej·calipers·hardware/anyma-ble-calipers-c3/anyma-c3-calipers.kicad_pcb
About the Calipers PCB
Calipers is an open source ESP32 PCB design by mirdej, published on GitHub. It is a 2-layer board measuring 21.3 × 28.1 mm, with 32 components from 22 distinct parts.
Its main chip is the ESP32-C3-MINI-1, from the ESP32 family. Other key parts include the XC6220B331MR and MCP73831-2-OT. By type, the board carries 13 resistors, 5 connectors, 4 ICs, 4 capacitors, 2 transistors and 2 switches.
It belongs with the iot & wireless designs in this gallery.
From the project
Bluetooth enabled Calipers
Bluetooth extension for cheap digital calipers. An ESP32 reads data from the caliper serial port and "types" it as a BLE keyboard directly into the host computer.
There are different scales and calipers out there with different protocols. See the readme of the library for more information.
Main components on the Calipers
Calipers bill of materials (BOM)
32 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-MINI-1 | ESP32-C3-MINI-1 | U1 |
| 1 | ~ | TDFN-8-1EP_2x2mm_P0.5mm_EP0.8x1.2mm | U2 |
| 1 | XC6220B331MR | SOT-23-5 | U3 |
| 1 | MCP73831-2-OT | SOT-23-5 | U5 |
| 2 | BC847 | SOT-23_BEC | Q1, Q2 |
| 1 | Conn_01x03_Pin | solderpad_1.27mm_3 | J1 |
| 1 | Prog | AnymaPOGO-ESP | J2 |
| 1 | USB_C_Receptacle_USB2.0 | JAE_USB-C_SJ122205 | J3 |
| 1 | BATT+ | Solderpad_1mm | J9 |
| 1 | BATT- | Solderpad_1mm | J10 |
| 1 | Btn-1 | Alps_Tactile_Switch | SW2 |
| 1 | Btn-2 | Alps_Tactile_Switch | SW4 |
| 1 | CHRG | LED_0805_2012Metric | D2 |
| 1 | RDY | LED_0805_2012Metric | D3 |
| 1 | 1u | C_0603_1608Metric | C1 |
| 1 | 100n | C_0603_1608Metric | C2 |
| 1 | 10u | C_0805_2012Metric | C3 |
| 1 | 4u7 | C_0805_2012Metric | C4 |
| 5 | 5k1 | R_0603_1608Metric | R1, R2, R3, R4, R5 |
| 2 | 560 | R_0603_1608Metric | R6, R12 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 2k | R_0603_1608Metric | R8, R9, R10, R11 |
| 2 | 51k | R_0603_1608Metric | R15, R16 |
Calipers design files
The KiCad project lives in the mirdej/calipers repository on GitHub; these links point at the commit this page was built from.
Calipers: common questions
What microcontroller does the Calipers use?
The Calipers is built around the ESP32-C3-MINI-1, from the ESP32 family.
How big is the Calipers PCB?
The Calipers measures 21.3 × 28.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Calipers?
32 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Calipers design files?
From the mirdej/calipers repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Calipers design in my own project?
The repository has no license, so all rights stay with mirdej. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Calipers without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k