Opel motor interface
MITEVT·opel_motor_interface·hardware/final_outline.kicad_pcb
About the Opel motor interface PCB
Opel motor interface is an open source PCB design by MITEVT, published on GitHub under the MIT license. It is a 2-layer board measuring 99.5 × 75 mm, with 43 components from 22 distinct parts.
Other key parts include the MCP2551-I/SN, MCP2515_TSSOP, LPC11C14, MCP1755-33 and MCP1755-5. By type, the board carries 16 capacitors, 15 resistors, 8 ICs and 4 connectors.
From the project
Firmware for MIT EVT's Opel GT Motor Interface Module
Main components on the Opel motor interface
Opel motor interface bill of materials (BOM)
43 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | MCP2551-I/SN | MSOP-8_3x3mm_Pitch0.65mm | U401, U404 |
| 1 | MCP2515_TSSOP | TSSOP-20_4.4x6.5mm_Pitch0.65mm | U402 |
| 1 | LPC11C14 | LQFP-48_7x7mm_Pitch0.5mm | U403 |
| 1 | MCP1755-33 | SOT-23-5 | U501 |
| 1 | MCP1755-5 | SOT-23-5 | U502 |
| 1 | MAX232 | SOIC-16_3.9x9.9mm_Pitch1.27mm | U601 |
| 1 | SN74HCT125 | SOIC-14_3.9x8.7mm_Pitch1.27mm | U602 |
| 1 | CANCONNECTOR | 776280-1 | P001 |
| 1 | CONN_01X14 | 776267-1 | P002 |
| 1 | ISP | Connector_Microfit3_Header_02x03_Angled_43045-060x | P100 |
| 1 | DEBUG_LED | Connector_Microfit3_Header_02x08_Angled_43045-160x | P101 |
| 2 | 10uF | C_0805_HandSoldering | C401, C406 |
| 2 | 0.1uF | C_0603_HandSoldering | C402, C405 |
| 6 | 1μF | C_0603_HandSoldering | C407, C409, C601, C602, C603, C604 |
| 2 | .1μF | C_0603_HandSoldering | C408, C410 |
| 2 | 10μ | C_0805_HandSoldering | C501, C503 |
| 2 | .1μ | C_0603_HandSoldering | C502, C504 |
| 2 | 20k | R_0603_HandSoldering | R1, R403 |
| 2 | 120 | R_0603_HandSoldering | R201, R202 |
| 8 | 100 | R_0603_HandSoldering | R301, R302, R303, R304, R305, R306, R307, R308 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10k | R_0603_HandSoldering | R401, R402 |
| 1 | 20K | R_0603 | R601 |
Opel motor interface design files
The KiCad project lives in the MITEVT/opel_motor_interface repository on GitHub; these links point at the commit this page was built from.
Opel motor interface: common questions
How big is the Opel motor interface PCB?
The Opel motor interface measures 99.5 × 75 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Opel motor interface?
43 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Opel motor interface design files?
From the MITEVT/opel_motor_interface repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Opel motor interface design in my own project?
Yes, under the terms of its MIT license, which MITEVT chose for the repository.