6 open source boards using the MCP2515_TSSOP

Real designs built with the MCP2515_TSSOP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the MCP2515_TSSOP

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MCP2515_TSSOP connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 3 is left unconnected on 5 of 5 designs.
  • Pin 4 is left unconnected on 5 of 5 designs.
  • Pin 5 is left unconnected on 5 of 5 designs.
  • Pin 6 is left unconnected on 5 of 5 designs.
Pin 3Connected to: Not connected 100%
Pin 4Connected to: Not connected 100%
Pin 5Connected to: Not connected 100%
Pin 6Connected to: Not connected 100%
Pin 7Connected to: Not connected 100%
Pin 8Connected to: Not connected 60% · a signal 40%
Pin 10Connected to: GND 100%
Pin 11Connected to: Not connected 100%
Pin 12Connected to: Not connected 100%
Pin 15Connected to: Not connected 100%
Pin 19Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 60% · 100 nF (3)
Pin 20Connected to: 3.3V 100%
  • Decoupling capacitor on 80% · 100 nF (4)

8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include A123-battery integration by MITEVT, Opel velocity interfaec by MITEVT, Cvra cape by cvra and Devboard panelized by MITEVT.

The MCP2515_TSSOP in open source designs

The gallery holds 6 open source boards using the MCP2515_TSSOP from 5 GitHub repositories; a typical one measures about 76.2 × 64.1 mm and carries around 40 components.

83% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is A123-battery integration by MITEVT.

Parts used alongside the MCP2515_TSSOP

What boards using the MCP2515_TSSOP are built for

MCP2515_TSSOP: common questions

Where can I find a MCP2515_TSSOP reference design?

Each of the 6 boards on this page is a real design using the MCP2515_TSSOP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MCP2515_TSSOP pin 3 connected?

Pin 3 is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MCP2515_TSSOP.

How is the MCP2515_TSSOP pin 4 connected?

Pin 4 is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MCP2515_TSSOP.

How is the MCP2515_TSSOP pin 5 connected?

Pin 5 is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MCP2515_TSSOP.

What parts are used alongside the MCP2515_TSSOP?

The LPC11C14, MCP2551-I-SN, ISO1050 and MCP1755 appear in the most repositories here.

How big is a typical board using the MCP2515_TSSOP?

The median is 76.2 × 64.1 mm, and 83% are two-layer designs.

What is the most popular open source board using the MCP2515_TSSOP?

By GitHub stars, A123-battery integration by MITEVT, with 2 stars.

Can I simulate one of these boards using the MCP2515_TSSOP before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part