HardLabs

SplitKeyboard

Mithilessh2010·Split-Keyboard·pcb/SplitKeyboard.kicad_pcb

SplitKeyboard PCB layout, top view — open source Nordic nRF board by Mithilessh2010

About the SplitKeyboard PCB

SplitKeyboard is an open source Nordic nRF PCB design by Mithilessh2010, published on GitHub. It is a 2-layer board measuring 277.1 × 112.2 mm, with 122 components from 3 distinct parts.

Its main chip is the XIAO-nRF52840-SMD, from the Nordic nRF family. By type, the board carries 60 switches, 60 diodes and 2 ICs.

It belongs with the keyboards, iot & wireless and power & battery designs in this gallery.

From the project

Split Keyboard is a 60-key split mechanical keyboard with wireless support. It runs on a XIAO nRF52840 and is powered by a battery, allowing it to connect to a computer using Bluetooth.

Split Keyboard is a 60-key split mechanical keyboard with wireless support. It runs on a XIAO nRF52840 and is powered by a battery, allowing it to connect to a computer using Bluetooth.

I made this project to learn more about CAD, PCB design, and firmware. I also wanted to build something useful that I can use every day since I currently just use a laptop keyboard.

SplitKeyboard, from the project README
From the project README

Main components on the SplitKeyboard

XIAO-nRF52840-SMD

SplitKeyboard bill of materials (BOM)

122 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
XIAO-nRF52840-SMD
U1, U2
60
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +52
60
D
D32, D33, D34, D35, D36, D37, D38, D39 +52

SplitKeyboard design files

The KiCad project lives in the Mithilessh2010/Split-Keyboard repository on GitHub; these links point at the commit this page was built from.

SplitKeyboard: common questions

What microcontroller does the SplitKeyboard use?

The SplitKeyboard is built around the XIAO-nRF52840-SMD, from the Nordic nRF family.

How big is the SplitKeyboard PCB?

The SplitKeyboard measures 277.1 × 112.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SplitKeyboard?

122 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SplitKeyboard design files?

From the Mithilessh2010/Split-Keyboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the SplitKeyboard design in my own project?

The repository has no license, so all rights stay with Mithilessh2010. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SplitKeyboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

More boards in Split-Keyboard

Similar boards